Item # 100 051 829 Model #FTS70387A USE AND CARE GUIDE LED LIGHT TABLE Questions, problems, missing parts? Before returning to the store call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this table. We strive to continually create quality products designed to enhance your home.
Table of Contents Pre-Assembly ................................................................ 3 Planning Assembly .................................................................. 3 Hardware Included .................................................................. 3 Package Contents .................................................................... 4 Assembly ....................................................................... 5 Operation ...........................................................
Pre-Assembly PLANNING ASSEMBLY Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non -abrasive surface such as carpet or cardboard. NOTE: More than one person may be required to complete the assembly of this product. HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA BB CC Part Description Quantity AA M6x15 Bolt 12 + 1 BB M6 Washer 12 + 1 CC Hex wrench 1 3 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly (continued) PACKAGE CONTENTS AA AA 1.5V 1.5V 1.5V AA A D C B Part Description Quantity A Table top 1 B Table leg 4 C Leg connector 1 D Rechargeable 1.
Assembly 1 Attaching the table legs Place the table top (A) upside down on a soft surface. Attach the table legs (B) to the table top (A) using M6x15 bolts (AA) and M6 washers (BB). NOTE: Loosely tighten all the bolts using the hex wrench (CC). AA B BB l AA BB A 5 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l (continued) Assembly 2 Connecting the leg connector to the table legs Attach the leg connector (C) to the table legs (B) using M6x15 bolts (AA) and M6 washers (BB). NOTE: Loosely tighten all the bolts using the hex wrench (CC).
l (continued) Assembly 3 Tightening all bolts Tighten all bolts Turn the table right side up. Check and ensure the table is tightly assembled and stable before use. 7 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l Operation 1 Turning the table on and off Move the bottom swtich to the ON position first then press the red switch on the side of table top to allow the use of the LED lights.
l (continued) Operation 2 Recharging and replacing batteries Included batteries (D) are rechargeable and powered by the solar receiver. To charge without solar energy, batteries (D) may be recharged in any 1.5 volt AA charger unit available at any Home Depot location. Should batteries need to be replaced, remove old batteries (D) from battery box under the table top (A), and place new rechargeable 1.5 volt AA batteries (D) flat end towards the spring.
This is an Adobe® Illustrator® File that was saved without PDF Content. To Place or open this file in other applications, it should be re-saved from Adobe Illustrator with the "Create PDF Compatible File" option turned on. This option is in the Illustrator Native Format Options dialog box, which appears when saving an Adobe Illustrator file using the Save As command. This is an Adobe® Illustrator® File that was saved without PDF Content.
Artículo núm. 100 051 829 Modelo núm. FTS70387A GUÍA DE USO Y MANTENIMIENTO MESA CON LUZ LED ¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al cliente de Hampton Bay de lunes a viernes, de 8:00 a.m. a 6:00 p.m. (hora estándar del Este) 1-855-HD-HAMPTON HAMPTONBAY.COM GRACIAS Apreciamos la confianza que has depositado en Hampton Bay al comprar esta mesa con luz led. Nos esforzamos para continuamente crear productos de calidad diseñados para mejorar tu hogar.
Tabla de contenido .............................................................. 3 Preensamblaje Planificación del ensamblaje ................................................ 3 Herrajes incluidos................................................................. 3 Contenido del paquete .......................................................... 4 Ensamblaje.................................................................... 5 Funcionamiento ............................................................
Preensamblaje PLANIFICACIÓN DEL ENSAMBLAJE Lee todas las instrucciones antes de ensamblar. Para evitar daños al producto, ensámblalo sobre una superficie suave, no abrasiva, como una alfombra o un cartón. NOTA: Se puede necesitar más de una persona para ensamblar completamente este producto. HERRAJES INCLUIDOS NOTA: No se muestra el tamaño real de los herrajes. AA BB CC Pieza Descripción Cantidad AA Perno M6x15 12 + 1 BB Arandela M6 12 + 1 CC Llave hexagonal 1 3 HAMPTONBAY.
Preensamblaje (continuación) CONTENIDO DEL PAQUETE AA AA 1.5V 1.5V 1.5V AA A D C B Pieza Descripción Cantidad A Superficie de la mesa 1 B Pata de la mesa 4 C Conector de las patas 1 D Baterías recargables AA de 1.
Ensamblaje 1 Coloca la superficie de la mesa (A) boca abajo sobre una superficie suave. Fija las patas de la mesa (B) a la superficie de la mesa (A) con pernos M6X15 (AA) y arandelas M6 (BB). NOTA: Aprieta ligeramente todos los pernos con la llave hexagonal (CC). AA BB B AA BB A 5 HAMPTONBAY.COM Para obtener asistencia, llama al 1-855-HD-HAMPTON.
l Ensamblaje (continuación) 2 Cómo ensamblar el conector de las patas a la pata de la mesa Fija el conector de la pata (C) a las patas de la mesa (B) con pernos M6x15 (AA) y arandelas M6 (BB). NOTA: Aprieta ligeramente todos los pernos con la llave hexagonal (CC).
l Ensamblaje (continuación) 3 Cómo apretar todos los pernos Apriet todos los pernos. Voltea la mesa a su posición normal. Verifica y asegúrate de que la mesa esté firmemente ensamblada y estable antes de usar. 7 HAMPTONBAY.COM Para obtener asistencia, llama al 1-855-HD-HAMPTON.
l Funcionamiento 1 Cómo encender y apagar la luz de la mesa Mueve el interruptor inferior a la posición de encendido primero y luego coloca el interruptor rojo en el lado de la mesa para permitir el uso de las luces LED.
l Funcionamiento (continuación) 2 Cómo recargar y reemplazar las baterías Las baterías incluidas (D) son recargables y se alimentan mediante el recpetor solar. Para cargar las baterías (D) sin energía solar, puedes hacerlo con cualquier cargador de AA de 1.5 coltios disponible en cualquier tienda de The Home Depot. Si necesitas reemplazar las baterías, quita las viejas (D) del compartimiento que está debajo de la superficie de la mesa (A) Y coloca las baterias recargables nuevas AA de 1.
¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al servicio al cliente de Hampton Bay. de lunes a viernes entre 8 a.m. y 6 p.m., (hora estándar del Este) 1-855-HD-HAMPTON HAMPTONBAY.COM Conserva este manual para uso en el futuro.