INSTRUCTION MANUAL 1LT Exterior Wall Lantern The Home Depot SKU 245-746 (UPC 725916814229) (black) The Home Depot SKU 250-399 (UPC 725916814250) (white) Page 1
Thank you for purchasing this Hampton Bay exterior wall lantern. This product has been manufactured with the highest standards of safety and quality. The finish of this lantern is weather resistant but over time will naturally weather and fade. FEATURES: 1. One-light exterior wall lantern in black finish (SKU 245-746) or white finish (SKU 250-399) with beveled glass. 2. This fixture has been engineered to safely use a 60 watt medium base incandescent light bulb (do not exceed 60 watts) (not included). 3.
CAUTION: 1. Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. 2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS. 1. If you have any non-electrical questions about this fixture, please contact our Customer Service Team at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
ASSEMBLY INSTRUCTIONS: 1. Carefully unpack the fixture. Lay out all parts on a clean surface.
ASSEMBLY: Page 5
PARTS INCLUDED FOR INSTALLATION (parts are not to scale): 2ea Lock Nuts (#2) 1ea Ground Screw (#8) 3ea Wire Connectors (#6) 2ea Outlet Box Screws (#9) 1ea Cross Bar (#7) 2ea Mounting Screws (#10) INSTALLATION INSTRUCTIONS: 1. Screw the two Mounting Screws (#10) into the Cross Bar (#7). Mount the Cross Bar (#7) to the Outlet Box (#5) using the two Outlet Box Screws (#9). [Make sure the threads of the Mounting Screws (#10) are facing outside when the Cross Bar (#7) is attached to the Outlet Box (#5).
INSTALLATION: Page 7
TROUBLESHOOTING: Problem Light bulb will not illuminate. Fuse blows or circuit breaker trips when light bulb is illuminated. Possible Cause 1. Light bulb is burned out. 2. Power is off. Corrective Action 1. Replace light bulb. 2. Make sure power supply is on. 3. Faulty wire connection. 3. Check wiring. 4. Faulty switch. 4. Test or replace switch. Crossed wires or power wire Check wire connections. is grounding out. PRODUCT MAINTENANCE: 1.
MANUAL DE INSTRUCCIONES Farola de Pared para Exteriores de 1 Luz The Home Depot SKU 245-746 (UPC 725916814229) (negra) The Home Depot SKU 250-399 (UPC 725916814250) (blanco) Page 9
Gracias por comprar esta farola Hampton Bay para exteriores. Este producto ha sido manufacturado con los estándares de seguridad y calidad más altos. El acabado de esta farola es resistente a la climatología pero con el tiempo se desgastará y descoloreará naturalmente. CARACTERÍSTICAS: 1. Farola de pared para exteriores de una luz en acabado en negro (SKU 245-746) o en acabado en blanco (SKU 250-399) con cristal biselado. 2.
PRECAUCIÓN: 1. Antes de comenzar la instalación o de quitar la instalación anterior, desconecte la alimentación apagando el interruptor del circuito o quitando el fusible en la caja de fusible. 2. POR FAVOR CONSULTE CON UN ELECTRICISTA CUALIFICADO SI TIENE CUALQUIER PREGUNTA ELÉCTRICA. 3. Si tiene cualquier pregunta no eléctrica sobre esta instalación, por favor contacte con nuestro Equipo de Atención al Cliente en el 1-855-HDHAMPTON o visite www.hamptonbay.com.
INSTRUCCIÓN DE ASAMBLEA: 1. Desempaquetar cuidadosamente la instalación, disponer todas las piezas sobre una superficie límpia. 2. Instalar una Bombilla de luz incandescente de base medio de 60 vatios (#4) (no incluido) o una bombilla de luz fluorescente compacta de base estándar (no incluido) en el Portalámpara (#3) en la instalación .
ASAMBLEA: Page 13
PARTES INCLUIDAS PARA EL INSTALACIÓN (las partes no están en proporción de escala): 2ea Tuercas de Cierre (#2) 1ea Tornillo de Toma de Tierra (#8) 3ea Conectores de Cables (#6) 1ea Barra Cruzada (#7) 2ea Tornillos de la Caja de Salida (#9) 2ea Tornillos de Montaje (#10) INSTRUCCIONES PARA LA INSTALACIÓN: 1. Atornille los dos Tornillos de Montaje (#10) en la Barra Cruzada (#7). Monte la Barra Cruzada (#7) a la Caja de Salida (#5) usando los dos Tornillos de la Caja de Salida (#9).
INSTALACIÓN: Page 15
SOLUCIÓN DE PROBLEMAS: Problema Bombilla de Luz no se enciende. Causa posible 1. Bombilla de Luz está quemada. 2. No hay alimentación. Acción Correctiva 1. Reemplace la bombilla. 2. Compruebe si hay suministro de electricidad. 3. La conexión de los cables 3. Inspeccione el cableado. no es la correcta. 4. El interruptor está defectuoso. Cuando se enciende la luz, el fusible se quema o el interruptor de circuito se dispara. Hay cables cruzados o el conductor de suministro no está conectado a tierra.
MANUEL D'INSTRUCTIONS Lanterne Murale d'Extérieur 1LP The Home Depot UGS 245-746 (UPC 725916814229) (noir) The Home Depot UGS 250-399 (UPC 725916814250) (blanc) Page 17
Nous vous remercions vivement d'avoir acheté cette lanterne murale d'extérieur Hampton Bay. Ce produit a été fabriqué en respectant les plus hauts standards de sécurité et de qualité. Le fini de cette lanterne est conçu pour résister aux intempéries mais se décolorera naturellement au fil du temps. CARACTERISTIQUES: 1. Lanterne murale d’extérieur à une lumière au fini noir (UGS 245-746) ou blanc (UGS 250-399) avec un verre biseauté. 2.
AVERTISSEMENT: 1. Avant de commencer à installer ce luminaire ou d'enlever l'ancien luminaire, déconnectez le courant en éteignant le disjoncteur ou en enlevant le fusible correspondant du coffret à fusibles. 2. CONSULTER UN ELECTRICIEN QUALIFIE POUR TOUTE QUESTION RELATIVE A L'ELECTRICITE. 3. En cas de questions non relatives à l'électricité à propos de ce luminaire, veuillez contacter notre centre de Service à la Clientèle au 1-855-HDHAMPTON ou visiter www.hamptonbay.com.
INSTRUCTIONS D'ASSEMBLAGE: 1. Déballer soigneusement le luminaire. Placer toutes les pièces sur une surface propre. 2. Installer une Ampoule incandescente de 60 watts à culot moyen (non incluses) (#4) ou une ampoule fluorescente compacte de base standard équivalente (non incluses) dans la Douille (#3) du luminaire.
ASSEMBLAGE: Page 21
PIECES INCLUSES POUR L'INSTALLATION (les pièces ne sont pas à l'échelle): 2x Écrous de Verrouillage (#2) 1x Vis Terre (#8) 3x Serre-Fils (#6) 2x Vis Boîte de Sortie (#9) 1x Entretoise (#7) 2x Vis de Montage (#10) INSTRUCTIONS D'INSTALLATION: 1. Visser les deux Vis de Montage (#10) sur la Entretoise (#7). Fixer la Entretoise (#7) sur la Boîte de Sortie (#5) grâce aux deux Vis de Boîte de Sortie (#9).
INSTALLATION: Page 23
SOLUTIONS DE DEPANNAGE: Problème L'ampoule ne s'allume pas. Cause Possible 1. L'ampoule est grillée. 2. Le courant est coupé. Le fusible saute ou le disjoncteur disjoncte lors de l'allumage. 3. Mauvaise connexion de fil. 4. Interrupteur mural défectueux. Mauvaise connexion des câbles ou mise à terre défectueuse. Mesure Corrective 1. Remplacez l'ampoule. 2. Vérifiez si le courant est sous tension. 3. Vérifiez le câblage. 4. Testez ou remplacez l'interrupteur. Vérifiez les connexions des câbles.