Use and Care Manual

8
Assembly (continued)
5
Putting The Canopy On The Beams, Attaching The Shade Rods To The Posts
6
Attaching The Top Tube To The Long Beams
Attach the top tube (J) to the long beams (A) using M8x100 combination bolts (AA), washers (CC) and plastic washers (DD).
Put the canopy (F) on the beams (A&B).
Attach the shade rods (K) into the canopy (F), and tighten the bandage to post (E).
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
F
F
K
2x
E
E
F
4x
Care
For best results, clean the frame with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt
particles that may accumulate.
Do not clean with abrasive materials, bleach or solvents.
Care and Cleaning
Store the daybed in a dry sheltered place when not in use.
Keep the daybed from re, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.
NOTE: Loosely tighten all the bolts using the hex wrench (EE).