#05 131 513 10 #05 129 955 Item# 10 Item # 1005 129 980 1GC-8896-SST 005 131 504 Model Mo d e l # G C#-A44-0007A 41021B-SST Item #xxxxxxxxxxxx xxxxxxxxxxxx Model #GB-5085-AAT USE AND CARE GUIDE HIGHGARDEN PADDED SWIVEL DINING CHAIR Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.
Table of Contents Pre-Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Planning Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Hardware Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Care and Clea.ning . . . . . . . . . . . . . . . . . . . . . .
Pre-Assembly PLANNING ASSEMBLY Please read this entire instruction manual prior to assembly. Verify all parts packed in the carton against the parts list. Remove all protective materials and place the parts on a non-ab rasive surface to avoid scratching. NOTE: More than one person may be required to complete the assembly of this product. HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Assembly 1 Attaching the arms to the seat panel 2 □ Attach the left arm (C) and right arm (B) to the seat panel (A) with M6 x 20 bolts (AA). Attaching the back panel □ Attach the back panel (D) to the arms (B and C) with M6x35 bolts (BB). NOTE: Please ensure all bolts are aligned and assembled correctly. Fully tighten all the bolts with M6 Allen wrench (GG). NOTE: Please ensure all bolts are aligned and assembled correctly. Do not tighten bolts until the frame assembly is complete.
Assembly (continued) 4 Connecting the chair base to the 3 Attaching the T-shaped base □ Attach the T-rock (E) to the finished frame with four M8 x 35 mm hex bolts (CC) in the order of bolts (CC), M8 washers (DD), rectangular steel plates (G), chair seat (A), T-rock (E), rectangular steel plates (G), chair bucket □ Insert the chair bucket into the chair base. The chair is ready for use. M8 washers (DD), M8 spring washers (EE) and M8 nuts (FF).
Care and Cleaning □ □ □ □ Do not allow water to build up in the frames. This will cause corrosion and possible freezing damage in cold climates. Use a mild soap and water for normal cleaning. Do not use janitorial or alcohol based cleaners. Some cleaners may be marked as natural, but some ingredients may cause discoloration or have an adverse reaction to your finish. Rinse with clean water and dry with a soft, absorbent cloth towel.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Item1005 # 118 807 Item# 1005 118 790 GC-8896-SST Model # Model# GT11371-SSS A44-0007A Item #xxxxxxxxxxxx xxxxxxxxxxxx Model #GB-5085AAT Model #GT-11372-SSS USE AND CARE GUIDE HIGHGARDEN DINING TABLE Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU dining table. continually create quality products designed to enhance your home.
Table of Contents Pre-Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Planning Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Hardware Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Care and Clea.ning . . . . . . . . . . . . . . . . . . . . . .
Pre-Assembly PLANNING ASSEMBLY Please read this entire instruction manual prior to assembly. Verify all parts packed in the carton against the parts list. Remove all protective materials and place the parts on a non-ab rasive surface to avoid scratching. NOTE: More than one person may be required to complete the assembly of this product. HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Assembly 1 Attaching the table legs the X-shaped support bar to 2 Attaching the table legs □ Place the table top (A) on a soft, flat non-abrasive surface. □ Attach the table legs (B) to the table top (A) with the M6 x 20 bolts (AA). □ Attach the four legs (B) to the X-shaped support bar (C) using the M6 x 20 bolts (AA). □ Once all of the bolts are in place, fully tighten all the bolts. NOTE: L oosely tighten all the bolts using the Allen wrench (BB).
Care and Cleaning □ □ □ □ Do not allow water to build up in the frames. This will cause corrosion and possible freezing damage in cold climates. Use a mild soap and water for normal cleaning. Do not use janitorial or alcohol based cleaners. Some cleaners may be marked as natural, but some ingredients may cause discoloration or have an adverse reaction to your finish. Rinse with clean water and dry with a soft, absorbent cloth towel.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.