Use and Care Manual

5 HAMPTONBAY.COM/HUBSPACE
Please contact 1-877-592-5233 for further assistance.
Installation
1
Preparing for installation
□ Disconnect power at the source prior to attempting to
install or service the light string.
□ Use only with 120V AC receptacles.
□ Before powering the string light, inspect bulb and socket.
Turn the bulb slowly, yet rmly, clockwise, relative to the
socket, to ensure a secure t of the bulb.
2
Attaching the controller to the string
light
□ Remove the cap from the 1-button controller (B), exposing
the female connector. On the string light (A), locate the
3-prong male connector, and join the two ends. Once
connected, secure the connector cap CLOCKWISE into
place over the receiving connector.
□ After inspecting the bulbs, cover the female connector at
the end of the light string set with its cap.
□ Plug-in the 3-prong AC connection to any compatible GFCI
outlet. The red indicator light on the controller will turn on,
and all bulbs should light in their default settings.
B
A