Instructions / Assembly

2
Table of Contents
Table of Contents .......................................2
Safety Information .....................................2
Warranty ....................................................2
3-Year Limited Warranty ........................2
Pre-Installation ..........................................3
Planning Installation ..............................3
Specications ........................................3
Tools Required .......................................3
Hardware Included .................................4
Package Contents ..................................4
Installation - Wired Doorbell ......................4
Installation - Wireless Doorbell ..................6
Operation ...................................................7
Tunes .........................................................8
Care and Cleaning .....................................8
Troubleshooting - Wired Doorbell ..............8
Troubleshooting - Wireless Doorbell ..........9
Safety Information
PRECAUTIONS
Please read and understand this entire manual
before attempting to assemble, install, or operate
this doorbell.
All electrical work must be in accordance with
national and local electrical codes. If in doubt,
consult a qualied electrician.
For wired installations, this doorbell requires
a 16 volt AC, 10 watt or a 16 volt AC, 15 watt
transformer.
For wireless only installations, this doorbell
requires 3 “C” alkaline batteries. Do NOT install
batteries if connecting the doorbell to transformer
wires.
For proper hardwired doorbell operation, a diode
must be installed on the push button of the main
entrance.
WARNING: To prevent possible SERIOUS INJURY or
DEATH never allow small children near batteries. If battery
is swallowed, immediately notify a doctor.
WARNING: DO NOT mix old and new batteries. DO
NOT mix battery types - such as alkaline, heavy duty, and
rechargeable - in a single device. Battery leakage may occur.
WARNING: DO NOT DISPOSE OF BATTERIES IN FIRE.
BATTERIES MAY EXPLODE OR LEAK.
WARNING: This doorbell requires a low voltage electrical
connection. Do not connect directly to 120V AC.
NOTE: The range of the wireless doorbell can vary with
location, temperature, and battery condition.
This device complies with Part 15 of the FCC Rules and
RSS-210 of Industry Canada. Operation is subject to the
following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may
cause undesired operation.
The user is cautioned that changes or modications
not expressly approved by the party responsible for
regulatory compliance could void the user’s authority to
operate the equipment.
Warranty
3-YEAR LIMITED WARRANTY
WHAT IS COVERED
This product is guaranteed to be free of factory defective parts and workmanship for a period of 3 years from date
of purchase. Purchase receipt is required for all warranty claims.
WHAT IS NOT COVERED
This warranty does not include expendable items (such as light bulbs, batteries, etc.), repair service, adjustment
and calibration due to misuse, abuse or negligence. Unauthorized service or modication of the product or of any
furnished component will void this warranty in its entirety. This warranty does not include reimbursement for
inconvenience, installation, setup time, loss of use, unauthorized service, or return shipping charges. This warranty
is not extended to other equipment and components that a customer uses in conjunction with this product.
Contact the Customer Service Team at 1-844-760-3644 or visit www.hamptonbay.com.