Item #1001407818 1001407820 1001407821 1001407823 Model #HB-7617-02 HB-7618-02 HB-7621-02 HB-7671-02 Item #1001407776 1001407811 1001411352 1001407817 Model #HB-7612-02 HB-7614-02 HB-7615-02 HB-7616-02 USE AND CARE GUIDE WIRELESS OR WIRED DOORBELL Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 5 p.m., CST, Monday - Friday 1-844-760-3644 HAMPTONBAY.COM Illustrations may vary from actual unit.
Table of Contents Table of Contents .......................................2 Safety Information .....................................2 Warranty ....................................................2 3-Year Limited Warranty ........................2 Pre-Installation ..........................................3 Planning Installation ..............................3 Specifications ........................................3 Tools Required .......................................3 Hardware Included...................
Pre-Installation PLANNING INSTALLATION Before installing the doorbell, ensure that all parts are present. Compare parts with the Hardware Included and Package Contents sections. If any part is missing or damaged, do not attempt to assemble, install, or operate this doorbell.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware shown to actual size. AA BB CC Part Description AA Screw Quantity 4 BB Wall anchor 4 CC Diode 2 PACKAGE CONTENTS ME VO HI ME LU UP C SYNC – PRESS AND RELEASE. RESET – HOLD 10 SECONDS. TUNE – HOLD 1 SECOND.
Installation Installation--Wired WiredDoorbell Doorbell(continued) 2 Removing the existing doorbell Remove the cover from the existing doorbell and label all wires with masking tape before disconnecting: “F” - Front door push button wire T F “T” - Transformer wire “R” - Rear door push button wire (if applicable) Disconnect all wires from existing doorbell and remove doorbell from mounting surface.
Installation - Wireless Doorbell 1 Installing the batteries If the doorbell is not connected to transformer wires, install 3 alkaline “C” batteries (not included) into the doorbell base (B). Ensure batteries are oriented correctly. the doorbell and push 2 Syncing button B TYPE “C” TYPE “C” NOTICE: When using this doorbell with a transformer, batteries are not needed and should not be installed even when using wireless push buttons.
Operation 1 Adjusting the doorbell volume ME VO HI ME LU The doorbell base (B) has an adjustable volume control. Rotate the volume control to adjust the volume. C 2 Selecting a musical tune wired doorbell SYNC – PRESS AND RELEASE. RESET – HOLD 10 SECONDS. The doorbell has different selectable tunes. The push button connected to the “REAR” terminal will only play Ding-Dong (two note tune). The push button connected to the “FRONT” terminal will play any of the musical tunes.
Tunes Westminster Relax Beethoven's Fifth Short Westminster Birthday Celebration Lincoln's Park Piano Westminster Auld Lang Syne Sundance Rockin' Westminster Star Spangled Banner Jazzy Sax Whittington We Wish You a Merry Christmas Ding Dong Short End Care and Cleaning Use a dry cloth to clean the doorbell cover and base. Do not use cleaners or polishes. Do not use any fluids on the doorbell base.
Troubleshooting - Wired Doorbell (continued) Problem Possible Cause Solution The doorbell sounds but does not play the entire tune or the “TUNE” button does not work. The push button diode is not installed correctly or is not working properly. Verify the diode is attached securely to the main push button; see step 5 under Installation - Wired Doorbell. The doorbell may not function properly if a diode is installed on more than one push button. Note: Some push buttons have a pre-installed diode.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 5 p.m., CST, Monday - Friday 1-844-760-3644 HAMPTONBAY.COM Retain this manual for future use.
Articulo #1001407818 1001407820 1001407821 1001407823 Modelo #HB-7617-02 HB-7618-02 HB-7621-02 HB-7671-02 Articulo #1001407776 1001407811 1001411352 1001407817 Modelo #HB-7612-02 HB-7614-02 HB-7615-02 HB-7616-02 GUÍA PARA EL USO Y CUIDADO TIMBRE INALÁMBRICO O TIMBRE CABLEADO ¿Tiene preguntas, problemas o piezas faltantes? Antes de la devolución al almacén llame al Servicio al Cliente de Hampton Bay de 8 a.m.-5 p.m., Hora del Central, de lunes a viernes. 1-844-760-3644 HAMPTONBAY.
Contenido Contenido ................................................12 Información de seguridad........................12 Garantía ...................................................12 3 años de garantía limitada .................12 Antes de la instalación ............................13 Planificación de la Instalación .............13 Especificaciones ..................................13 Herramientas Requeridas ....................13 Ferretería Incluida................................
Antes de la instalación PLANIFICACIÓN DE LA INSTALACIÓN Antes de instalar el timbre, asegúrese de tener todas las piezas. Compare las piezas con las indicadas en las secciones ferretería incluida y contenidos del paquete. Si alguna pieza falta o está dañada, no trate de ensamblar, instalar u operar este timbre.
Antes de la instalación (continuación) FERRETERÍA INCLUIDA NOTA: La ferretería se muestra en su tamaño real AA BB CC Pieza Descripción Cantidad AA Tornillo 4 BB Ancla de expansión de pared 4 CC Diodo 2 CONTENIDO DEL PAQUETE ME VO HI ME LU UP C SYNC – PRESS AND RELEASE. RESET – HOLD 10 SECONDS. TUNE – HOLD 1 SECOND.
Instalación - Timbre cableado (continuación) 2 Retiro del timbre existente Retire la tapa del timbre existente e identifique todos los cables con cinta protectora antes de desconectarlos: “F” – Cable del botón pulsador de la puerta delantera “T” – Cable del transformador “R” – Cable del botón pulsador de la puerta posterior (si es aplicable) T F Desconecte todos los cables del timbre existente y retire el timbre de la superficie de montaje.
Instalación - Timbre inalámbrico 1 Instalación de las pilas Si el timbre no está conectado a los cables del transformador, instale 3 pilas alcalinas tipo “C” (no incluidas) en la base (B) del timbre. Asegúrese que las pilas estén orientadas correctamente. del timbre y del 2 Sincronización pulsador B TYPE “C” TYPE “C” AVISO: Cuando use este timbre con un transformador, las pilas no son necesarias y no se las debe instalar incluso si usa pulsadores inalámbricos.
Operación 1 Ajuste del volumen del timbre ME VO HI ME LU La base (B) del timbre tiene un control de volumen regulable Gire el control de volumen para regular el volumen. C 2 Selección de un tono musical timbre cableado SYNC – PRESS AND RELEASE. RESET – HOLD 10 SECONDS. El timbre tiene diferentes tonos seleccionables. El pulsador conectado al terminal “REAR” (POSTERIOR) reproducirá solo un ding-dong (tono de dos notas).
Tonos Westminster Relajación 5ta Sinfonía de Beethoven Westminster corto Celebración de cumpleaños El parque Lincoln Westminster piano Tiempos pasados Danza del sol Westminster rock Himno nacional americano Saxofón jazz Whittington Le deseamos una Feliz Navidad Din Don Tono breve Cuidado y limpieza Use un paño seco para limpiar la tapa y la base del timbre. No use limpiadores ni pulidores. No use ningún líquido sobre la base del timbre.
Análisis de averías - Timbre cableado (continuación) Problema Causa Probable Solución El timbre suena, pero no reproduce todo el tono o el botón “TUNE” (TONO) no funciona. El diodo del botón pulsador no está bien instalado o no funciona correctamente. Verifique que el diodo esté bien sujeto al pulsador principal; Consulte el paso 5 en la sección Instalación- Timbre cableado. El timbre pueda que no funcione correctamente si un diodo es instalado en más de un pulsador.
¿Tiene preguntas, problemas o piezas faltantes? Antes de la devolución al almacén llame al Servicio al Cliente de Hampton Bay de 8 a.m.-5 p.m., Hora del Central, de lunes a viernes. 1-844-760-3644 HAMPTONBAY.COM Guarde este manual para uso futuro.