Instructions / Assembly

6
Operation
1
Setting the wireless push
button
NOTE: Item 1003008643 (HB-7734-03) contains two push
buttons. One push button is factory set as the “FRONT”
door push button and one push button is factory set as the
“REAR” door push button. They are labelled accordingly.
The wireless push button (B) has two options for tune
selection: Play the selected “FRONT” door musical
tune or play the “REAR” door designated tune (Ding).
Ƒ The push button (B) comes from the factory
with no jumper (DD) installed on the pins. This
setting will play the “FRONT” door musical
tune.
Ƒ To set the push button (B) to play the “REAR”
door tune (Ding), add the jumper (DD) to the
pins inside the push button (B).
Push button (B) set as
“FRONT” door – no
jumper (DD) on the pins
(Factory Default)
Push button (B) set
as “REAR” door –
jumper(DD) is on the pins
CR2032 CR2032
2
Selecting a tune
The doorbell (A) has different selectable tunes. The
push button (B) set as the “REAR” push button (B) will
only play Ding (one note tune). The push button (B) set
as the “FRONT” push button (B) will play either Ding-
Dong (two note tune) or Westminster (eight note tune).
Ƒ Press and release the “TUNE” button (2) on the
doorbell (A) until the desired “FRONT” tune is
heard.
NOTE: All doorbell models are designed to work with up
to 5 wireless push buttons (sold separately).
NOTE: All doorbells are designed to play only two
different tunes no matter how many push buttons are used.
TU
NE – HOL
D
1 SE
C
OND.
SY
NC – HOL
D
3 S
E
C
ONDS.
R
ESET – HOLD
10 SE
CONDS
.
Care and Cleaning
Ƒ Use a dry cloth to clean the doorbell and push button.
Ƒ Do not use cleaners or polishes.
Ƒ Do not use any uids on the doorbell or push button.
DD
A
2
B