Item #1001417374 Model #HB-7900-02 USE AND CARE GUIDE WIRELESS DOOR ALERT KIT Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 5 p.m., CST, Monday - Friday 1-844-760-3644 HAMPTONBAY.COM Illustrations may vary from actual unit. THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this wireless door alert kit. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents .......................................2 Safety Information .....................................2 Warranty ....................................................2 3-Year Limited Warranty ........................2 Pre-Installation ..........................................3 Planning Installation ..............................3 Specifications ........................................3 Tools Required .......................................3 Hardware Included..................
Pre-Installation PLANNING INSTALLATION Before installing the wireless door alert kit, ensure that all parts are present. Compare parts with the Hardware Included and Package Contents sections. If any part is missing or damaged, do not attempt to assemble, install, or operate this wireless door alert kit.
Pre-Installation (continued) PACKAGE CONTENTS B A C D Part Description Quantity A Doorbell 1 B Sensor 1 C Magnet 1 D Spacer 1 Installation 1 Installing the doorbell Ƒ Plug in the doorbell (A) at the desired location. A 2 Removing the battery tab Ƒ Ƒ B Remove the back of the sensor (B) by pushing in the tab on the bottom with a small screwdriver (not included). Remove the orange battery tab from the sensor (B).
Installation (continued) 3 Testing the sensor and doorbell Ƒ Ƒ Ƒ B Temporarily position the sensor (B) and magnet (C) where they will be mounted. Move the magnet (C) away from the sensor (B) to simulate a door being opened. The red LED should flash and the doorbell (A) will sound “Beep-Beep”. If the doorbell does not sound, move the doorbell closer to the sensor and test again. A C NOTE: Do not permanently mount the sensor until the sensor and doorbell are working properly.
Installation (continued) 6 Mounting the magnet D B Use the small screws (BB) (or the large screws (CC) if using the magnet spacer (D)) to mount the magnet (C). Ƒ Ƒ Ƒ Ƒ Remove the back of the magnet (C) by pushing in the tab on the bottom of the magnet with a small screwdriver. Place the magnet back against the mounting surface and mark the two screw holes. Drill two 1/16 in. pilot holes. Attach the magnet back with the small screws (BB). Tighten securely and snap on the front of the magnet (C).
Operation (continued) 3 Selecting a push button tune NOTE: All doorbells are designed to play only two different tunes no matter how many push buttons are used. The doorbell (A) has different selectable tunes for push buttons (sold separately). The push button set as the “REAR” push button will only play Ding (one note tune). The push button set as the “FRONT” push button will play either Ding-Dong (two note tune) or Westminster (eight note tune).
Troubleshooting (continued) Problem Possible Cause Solution Batteries seem okay, but the doorbell does not work after installation. Ƒ Doorbell or sensor is mounted on metal or near metal studs. Ƒ Metal reduces transmission range. Use 1/4 in. to 1/2 in. (6 to 13 mm) wood shims to move the doorbell or sensor away from the metal surface. Ƒ Doorbell is mounted near a concrete floor or wall. Ƒ Concrete may reduce range. Move the doorbell away from the concrete surface.
HAMPTONBAY.com Please contact 1-844-760-3644 for further assistance.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 5 p.m., CST, Monday - Friday 1-844-760-3644 HAMPTONBAY.COM Retain this manual for future use.
Articulo #1001417374 Modelo #HB-7900-02 GUÍA PARA EL USO Y CUIDADO JUEGO INALÁMBRICO DE ALERTA PARA PUERTAS ¿Tiene preguntas, problemas o piezas faltantes? Antes de la devolución al almacén llame al Servicio al Cliente de Hampton Bay de 8 a.m.-5 p.m., Hora del Central, de lunes a viernes. 1-844-760-3644 HAMPTONBAY.COM Las ilustraciones pueden ser diferentes de la unidad comprada. GRACIAS Agradecemos la confianza que ha depositado en Hampton Bay al comprar este juego inalámbrico de alerta para puertas.
Contenido Contenido ................................................12 Información de seguridad........................12 Garantía ...................................................12 3 años de garantía limitada .................12 Antes de la instalación ............................13 Planificación de la Instalación .............13 Especificaciones ..................................13 Herramientas Requeridas ....................13 Ferretería Incluida................................
Antes de la instalación PLANIFICACIÓN DE LA INSTALACIÓN Antes de instalar el juego inalámbrico de alerta para puertas, asegúrese de que todas las partes estén presentes. Compare las piezas con las secciones Ferretería Incluida y Contenido del Paquete. Si alguna parte falta o está dañada, no trate de ensamblar, instalar u operar este juego inalámbrico de alerta para puertas.
Antes de la instalación (continuación) CONTENIDO DEL PAQUETE B A C D Pieza Descripción Cantidad A Timbre 1 B Detector 1 C Imán 1 D Espaciador 1 Instalación 1 Instalación del timbre Ƒ Enchufe el timbre (A) en la ubicación deseada. A 2 Retiro de la lengüeta de la pila Ƒ Ƒ B Con un destornillador pequeño (no se incluye), presione la pestaña en la parte inferior para retirar la parte posterior del sensor (B). Retire la pestaña naranja de la batería del sensor (B).
Instalación (continuación) del detector y del 3 Prueba timbre Ƒ Ƒ Ƒ B Coloque temporalmente el detector (B) y el imán (C) donde serán montados. Aleje el imán (C) del detector (B) para simular una puerta que se está abriendo. EL LED rojo deberá titilar y el timbre sonará “bip-bip”. Si el timbre no suena, acerque más el timbre al detector (B) y pruebe de nuevo. A C NOTA: No monte permanentemente el pulsador hasta que el pulsador y el timbre estén funcionando correctamente.
Instalación (continuación) 6 Montaje del imán D B Use los tornillos pequeños (BB) (o los tornillos grandes (CC) si utiliza el espaciador (D) del imán ) para montar el imán (C). Ƒ Ƒ Ƒ Ƒ Retire la parte posterior del imán (C) empujando la aleta de la parte inferior del imán (C) con un destornillador pequeño. Coloque la parte posterior del imán (C) contra la superficie de montaje y marque los dos orificios para tornillos. Taladre dos orificios guía de 1/16 de pulgada.
Operación (continuación) de un tono para el 3 Selección pulsador NOTA: Todos los timbres están diseñados para reproducir solo dos tonos diferentes no importa cuantos pulsadores se utilicen. El timbre (A) tiene diferentes tonos seleccionables para los pulsadores (se venden por separado). El pulsador configurado como pulsador “DE ATRÁS” reproducirá solo un Ding (tono de una nota).
Análisis de averías (continuación) Problema Causa Probable Solución Las pilas parecen estar bien, pero el timbre no funciona luego de la instalación. Ƒ El timbre o el sensor están montados sobre metal o cerca de montantes de metal. Ƒ El metal reduce el alcance de transmisión. Use calzas de madera de 6 a 13 mm (1/4" a 1/2") para alejar el timbre y la chimenea de la superficie de metal. Ƒ El timbre está montado cerca de un piso o de una pared de hormigón. Ƒ El concreto puede reducir el alcance.
HAMPTONBAY.com Por favor, póngase en contacto al 1-844-760-3644 para obtener más ayuda.
¿Tiene preguntas, problemas o piezas faltantes? Antes de la devolución al almacén llame al Servicio al Cliente de Hampton Bay de 8 a.m.-5 p.m., Hora del Central, de lunes a viernes. 1-844-760-3644 HAMPTONBAY.COM Guarde este manual para uso futuro.