Item #1001411386 Model #HB-7903-02 USE AND CARE GUIDE WIRELESS MOTION ALERT DOORBELL KIT Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 5 p.m., CST, Monday - Friday 1-844-760-3644 HAMPTONBAY.COM Illustrations may vary from actual unit. THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this wireless motion alert doorbell kit.
Table of Contents Table of Contents .......................................2 Safety Information .....................................2 Warranty ....................................................2 3-Year Limited Warranty ........................2 Pre-Installation ..........................................3 Planning Installation ..............................3 Specifications ........................................3 Tools Required .......................................3 Hardware Included..................
Pre-Installation PLANNING INSTALLATION Before installing the wireless motion alert doorbell kit, ensure that all parts are present. Compare the parts with the Hardware Included and Package Contents sections. If any part is missing or damaged, do not attempt to assemble, install, or operate this wireless motion alert doorbell kit. Estimated installation time: 30 minutes SPECIFICATIONS Power requirements Doorbell Push button Motion sensor 120V, 60 Hz Type A23 12V battery (included) 2x - Type “AAA” 1.
Pre-Installation (continued) PACKAGE CONTENTS A B C Part Description Quantity A Doorbell 1 B Motion sensor 1 C Push button 1 Installation 1 Installing the doorbell Plug in the doorbell (A) at the desired location. A the batteries into the 2 Installing motion sensor B Remove the screw and cover on the back of the motion sensor (B) using a small Phillips screwdriver (not included). Install two “AAA” batteries. Ensure the batteries are oriented correctly.
Installation (continued) 3 Removing the battery tab 4 C Remove the back of the push button (C) by pushing in the tab on the bottom with a small screwdriver (not included). Remove the orange battery tab from the push button (C). Testing the push button and doorbell C Temporarily position the push button (C) where it will be mounted. Press the push button (C) to verify the doorbell (A) and push button (C) work properly.
Installation (continued) 6 Mounting the push button Use either screws (BB) or double-sided tape (CC) to mount the push button (C). To mount with screws (BB), remove the back of the push button (C) by pushing in the tab on the bottom with a small screwdriver. Place the push button (C) back on the door jamb and mark the two screw holes. Attach with screws (BB) and snap on the front of the push button (C).
Operation (continued) 2 Setting the sensor’s day detect The sensor (B) can be programmed to operate during the daytime only (DAY ONLY) or both day and night (DAY/NIGHT). B DAY DETECT DAY ONLY DAY/ NIGHT Remove the battery cover and batteries from the sensor (B). Slide the “DAY DETECT” switch to the desired mode. Replace the batteries and cover.
Operation (continued) 6 Selecting a push button tune NOTE: All doorbells are designed to play only two different tunes no matter how many push buttons are used. The doorbell (A) has different selectable tunes for different push buttons (sold separately). The push button set as the “REAR” push button will only play “Ding” (one note tune). The push button set as the “FRONT” push button will play either “Ding-Dong” (two note tune) or Westminster (eight note tune).
Troubleshooting (continued) Problem Possible Cause Solution The doorbell sounds at night. The day detect switch is in the “DAY/NIGHT” position. The sensor is functioning correctly. If a doorbell alert is not desired at night, slide the day detect switch to the “DAY ONLY” position. The doorbell does not sound during the day. The day detect switch is in the “DAY ONLY” position and the sensor is located in a dark area.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 5 p.m., CST, Monday - Friday 1-844-760-3644 HAMPTONBAY.COM Retain this manual for future use.
Articulo #1001411386 Modelo #HB-7903-02 GUÍA PARA EL USO Y CUIDADO JUEGO INALÁMBRICO DE TIMBRE DE ALERTA DE MOVIMIENTO ¿Tiene preguntas, problemas o piezas faltantes? Antes de la devolución al almacén llame al Servicio al Cliente de Hampton Bay de 8 a.m.-5 p.m., Hora del Central, de lunes a viernes. 1-844-760-3644 HAMPTONBAY.COM Las ilustraciones pueden ser diferentes de la unidad comprada.
Contenido Contenido ................................................12 Información de seguridad........................12 Garantía ...................................................12 3 años de garantía limitada .................12 Antes de la instalación ............................13 Planificación de la Instalación .............13 Especificaciones ..................................13 Herramientas Requeridas ....................13 Ferretería Incluida................................
Antes de la instalación PLANIFICACIÓN DE LA INSTALACIÓN Antes de instalar el juego inalámbrico de timbre de alerta de movimiento, asegúrese de que todas las partes estén presentes. Compare las piezas con las secciones Ferretería Incluida y Contenido del Paquete. Si alguna parte falta o está dañada, no trate de ensamblar, instalar u operar este juego inalámbrico de timbre de alerta de movimiento.
Antes de la instalación (continuación) CONTENIDO DEL PAQUETE A B C Pieza Descripción Cantidad A Timbre 1 B Sensor de movimiento 1 C Pulsador 1 Instalación 1 Instalación del timbre Enchufe el timbre (A) en la ubicación deseada. A de las pilas en el 2 Instalación detector de movimiento B Quite el tornillo de la parte posterior del detector de movimiento (B) con un destornillador pequeño de estrella (no incluido). Instale dos pilas “AAA”.
Instalación (continuación) 3 Retiro de la lengüeta de la pila C Con un destornillador pequeño (no se incluye), presione la pestaña en la parte inferior del botón pulsador (C) para retirar la parte posterior. Retire la pestaña naranja de la batería del botón pulsador (C). del pulsador y del 4 Prueba timbre C Coloque temporalmente el pulsador (B) donde será montado. Presione el pulsador (C) para verificar que el timbre (A) y el pulsador (C) funcionen bien.
Instalación (continuación) 6 Montaje del pulsador Use tornillos (BB) o cinta doble faz (CC) para montar el botón pulsador (C). Para montar con tornillos (BB), presione la pestaña de la parte inferior del botón pulsador (C) con un destornillador pequeño y retire la parte posterior. Coloque la parte posterior del botón pulsador (C) en la jamba de la puerta y marque los dos orificios para los tornillos. Fije con tornillos (BB) y coloque a presión la parte delantera del botón pulsador (C).
Operación (continuación) de la detección 2 Configuración del detector durante el día El detector (A) puede ser programado para operar sólo durante el día (DAY ONLY) o durante el día y la noche (DAY/NIGHT). B DAY DETECT DAY ONLY DAY/ NIGHT Retire la tapa de las pilas y las pilas del detector (A). Deslice el interruptor “DAY DETECT” (“DETECTAR DURANTE EL DÍA”) a la modalidad deseada. Cambie las pilas y la tapa.
Operación (continuación) de un tono para el 6 Selección pulsador NOTA: Todos los timbres están diseñados para reproducir solo dos tonos diferentes no importa cuantos pulsadores se utilicen. El timbre (A) tiene diferentes tonos seleccionables para los pulsadores (se venden por separado). El pulsador (B) configurado como pulsador “DE ATRÁS” reproducirá solo un Ding (tono de una nota).
Análisis de averías (continuación) Problema Causa Probable Solución El timbre suena en la noche. El interruptor detector de día está en la posición “DAY/NIGHT” El detector está funcionando correctamente. Si no se desea una alerta de timbre en la noche, deslice el interruptor detector de día a la posición "DAY ONLY". El timbre no suena durante el día. El interruptor detector de día está en la posición DAY ONLY" y el detector está situado en una zona oscura.
¿Tiene preguntas, problemas o piezas faltantes? Antes de la devolución al almacén llame al Servicio al Cliente de Hampton Bay de 8 a.m.-5 p.m., Hora del Central, de lunes a viernes. 1-844-760-3644 HAMPTONBAY.COM Guarde este manual para uso futuro.