Item: 1001255327 Model: HB2577-35 USE AND CARE GUIDE ____________________________________ 3 LIGHT BATH FIXTURE Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday 8 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this bath fixture.
Table of Contents Table of Contents Safety Information Warranty Pre-Installation Planning the Installation Tools Hardware Package Contents 2 2 2 3 3 3 3 4 Installation Operation Care and Cleaning Exterior Maintenance Interior Maintenance Troubleshooting 5 7 7 7 7 7 Safety Information Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
Pre-Installation PLANNING THE INSTALLATION Read all instructions before assembly and installation. Before starting installation of the fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: Keep your receipt and these instructions for Proof of Purchase.
Pre-Installation (continued) PACKAGE CONTENTS C B A Part Description Quantity A Fixture Body 1 B Glass Shade 3 C Socket Ring 3 4
Installation 1 Mounting the hardware Thread the fixture mounting screws (EE) into the provided holes of the mounting bracket (FF). Thread the hex nuts (BB) onto the fixture mounting screws (EE). Do not tighten the hex nuts (BB) at this time. Place the back plate of the fixture body (A) over the outlet box and onto the fixture mounting screws (EE). Adjust the fixture mounting screws (EE) until they protrude out from the back plate 1/4 in.
Installation (continued) 3 A Mounting the fixture Place the back plate of the fixture body (A) onto the fixture mounting screws (EE) and secure it into place by using the lock nuts (AA) provided. AA 4 EE Assembling the fixture NOTE: Do not exceed a 100 watt incandescent light bulb. For more information on the proper lighting to use, see www.homedepot.com/lightingfacts. Slide the glass shades (B) over the sockets and onto the socket cups.
Operation Turn on power at the circuit breaker or fuse box. Turn the light switch on to activate the fixture. Care and Cleaning EXTERIOR MAINTENANCE NOTE: Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully. Use a dry or slightly dampened clean cloth and wipe the surface of the fixture. INTERIOR MAINTENANCE Disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday-Friday 8 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Artículo: 1001255327 Modelo: HB2577-35 GUÍA DE USO Y MANTENIMIENTO ____________________________________ LUMINARIO PARA BAÑO DE 3 LUCES Preguntas, problemas, o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay 8 a.m. – 7 p.m., Hora del Este, Lunes – Viernes 8 a.m. – 6 p.m., Hora del Este, Sábado 1-855-HD-HAMPTON HAMPTONBAY.COM GRACIAS Le agradecemos la confianza que han depositado en Hampton Bay a través de la compra de este Luminario para baño.
Tabla de Contenidos Tabla de Contenidos Información de Seguridad Garantía Pre-Instalación Planificación de la Instalación Herramienta Ferretería Contenido del Paquete 10 10 10 11 11 11 11 12 Instalación Operación Cuidado y Limpieza Mantenimiento Exterior Mantenimiento Interior Solución de Problemas 13 15 15 15 15 15 Información de Seguridad Antes de iniciar la instalación de este aparato o la eliminación de un accesorio anterior, desconecte la alimentación apagando el disyuntor o quitando el fusible
Pre-Instalación PLANIFICACIÓN DE LA INSTALACIÓN Lea todas las instrucciones antes del montaje e instalación. Antes de comenzar la instalación de la luminaria o el retiro de un artefacto anterior, desconecte la alimentación apagando el disyuntor o quitando el fusible en la caja de fusibles. Para evitar daños a este producto, montarlo en una superficie suave y no abrasiva, como una alfombra o cartón. NOTA: Guarde su recibo y estas instrucciones para comprobante de compra.
Pre-Instalación (continuado) CONTENIDO DEL PAQUETE C B A Parte Descripción Cantidad A Curepo Principal 1 B Pantalla de Vidrio 3 C Aro para Zócalo 3 12
Instalación 1 Montando la ferretería Enrosque los tornillos del luminario (EE) en los agujeros provistos en la ménsula de montaje (FF). Enrosque las tuercas hexagonales (BB) en los tornillos del luminario (EE). No apriete las tuercas hexagonales (BB) en este momento. DD Saque los cables de alimentación de la caja de distribución y monte la ménsula de montaje (FF) sobre la caja de distribución utilizando los tornillos de la ménsula (DD).
Instalación (continuado) 3 A Montando el luminario Coloque la placa del curepo principal (A) sobre los tornillos del luminario (EE) y asegúrela con las tuercas de seguridad (AA) que se incluyen. AA 4 EE Ensamblando el luminario NOTA: No exceda una bombilla incandescente de 100 vatios. Para obtener más información sobre la iluminación adecuada que debe utilizar, consulte www.homedepot.com/lightingfacts. Deslice las pantallas de vidrio (B) sobre los zócalos en los soportes de zócalo.
Operación Conecte la alimentación en el disyuntor o caja de fusibles. Gire el interruptor de la luz para activar el aparato. Cuidado y Limpieza MANTENIMIENTO DEL EXTERIOR NOTA: No use limpiadores con químicos, solventes o abrasivos fuertes. Use sólo un paño seco para sacudir o limpiar con cuidado. Use un paño limpio y seco o ligeramente humedecido y limpie la superficie de la linterna.
Preguntas, problemas, o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay 8 a.m. – 7 p.m., Hora del Este, Lunes – Viernes 8 a.m. – 6 p.m., Hora del Este, Sábado 1-855-HD-HAMPTON HAMPTONBAY.COM Conserve este manual para futuras consultas.
Article: 1001255327 Modèle: HB2577-35 GUIDE D'UTILISATION ET D'ENTRETIEN ____________________________________ APPLIQUE DE SALLE DE BAIN À 3 LUMIÈRES Questions, problèmes, pièces manquantes? Avant de retourner au magasin, appeler Hampton Bay Service à la clientèle 8:00 – 19:00, HNE, Lundi – Vendredi 8:00 – 18:00, HNE, Samedi 1-855-HD-HAMPTON HAMPTONBAY.COM MERCI Nous apprécions la confiance que vous avez placée dans Hampton Bay grâce à l'achat de cette applique de salle de bain.
Table des Matières Table des Matières Consignes de Sécurité Garantie Pré-Installation Planification du l’Installation Outils Matériel Contenu du Paquet 18 18 18 19 19 19 19 20 Installation Opération Entretien et Nettoyage Entretien Extérieur Entretien Intérieur Dépannage 21 23 23 23 23 23 Consignes de Sécurité Avant de commencer l'installation de ce luminaire ou à la dépose d'un précédent luminaire, débrancher l'alimentation en désactivant le disjoncteur ou en retirant le fusible de la platine de fus
Pré-Installation PLANIFICATION DE L'INSTALLATION Lire toutes les instructions avant assemblage et l'installation. Avant de commencer l'installation du luminaire ou la dépose d'un précédent luminaire, débrancher l'alimentation en désactivant le disjoncteur ou en retirant le fusible de la platine de fusibles. Pour éviter d'endommager le produit, assembler sur un doux et non abrasif surface tels que tapis ou un morceau de carton. NOTE: Conservez votre reçu et ces instructions à la preuve d'achat.
Pré-Installation (continue) CONTENU DU PAQUET C B A Partie Description Quantité A Corps du Luminaire 1 B Abat-jour en Verre 3 C Anneaux de Douilles 3 20
Installation 1 Le montage du matériel Vissez les vis du montage (EE) dans les trous prévus sur la plaque de fixation (FF). Vissez les écrous hexagonaux (BB) sur les vis du montage (EE). Ne pas serrer les écrous hexagonaux (BB) pour l’instant. Tirez les fils d’alimentation hors de la boîte de sortie et installez la plaque de fixation (FF) sur la boîte de sortie à l’aide des vis de luminaire (DD).
Installation (continue) 3 A Le montage du luminaire Placez la plaque arrière du le corps du luminaire (A) sur les vis du montage (EE) et le fixer en place à l'aide des Écrous de serrage (AA) fournies. AA 4 EE L'assemblage de luminaire NOTE: La puissance de l’ampoule incandescente ne doit pas dépasser 100 watts. Pour plus d'informations sur l'éclairage adéquat à utiliser, voir www.homedepot.com/lightingfacts.
Opération Mettez sous tension au niveau du disjoncteur ou des fusibles. Allumez l'interrupteur pour activer l'appareil. Entretien et Nettoyage ENTRETIEN EXTÉRIEUR NOTE: N’utilisez aucun produit de nettoyage contentant des agents chimiques, des solvants ou des abrasifs durs. Utilisez uniquement un linge doux et sec pour enlever la poussière en essuyant délicatement Utilisez un linge sec ou légèrement humide et essuyez le luminaire.
Questions, problèmes, pièces manquantes? Avant de retourner au magasin, appeler Hampton Bay Service à la clientèle 8:00 – 19:00, HNE, Lundi – Vendredi 8:00 – 18:00, HNE, Samedi 1-855-HD-HAMPTON HAMPTONBAY.COM Conserver ce manuel pour un utilisation ultérieure.