Item 1006 331 641 1006 330 992 1006 330 588 1006 331 650 1006 403 094 Model HB3670-35 HB3670-336 HB3670-337 HB3670-338 HB3670-339 USE AND CARE GUIDE VANITY LIGHT ELMCROFT Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this vanity light.
Table of Contents Table of Contents Safety Information Warranty Pre-Installation Planning the Installation Tools Required Hardware Included Package Contents 2 2 2 3 3 3 3 4 Installation Operation Care and Cleaning Exterior Maintenance Interior Maintenance Troubleshooting 5 7 7 7 7 7 Safety Information Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
Pre-installation PLANNING THE INSTALLATION Read all instructions before assembly and installation. Before starting installation of the fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: Keep your receipt and these instructions for Proof of Purchase.
Pre-installation (continued) PACKAGE CONTENTS B A Part Description Quantity A Shade 1 B Fixture Body 1 4
Installation 1 CC Attaching the mounting bracket Pull the supply wires out from the outlet box and mount the mounting bracket (EE) to the outlet box using the mounting screws (CC). EE 2 Connecting the wires AA NOTE: If you have electrical questions consult your local electrical code for approved grounding methods. EE Connect the black supply wire to the black fixture wire using a wire nut (AA). Connect the white supply wire to the white fixture wire using a wire nut (AA).
Installation (continued) 3 Securing the fixture B Place the fixture body (B) onto the mounting bracket (EE). Attach the fixture body (B) to the mounting bracket (EE) using the Fixture screws (BB). BB EE 4 Assembling the fixture NOTE: Do not exceed a 60 watt incandescent light bulb or equivalent CFL or LED bulb. B Place the steel shade (A) over the socket on the fixture body (B). Use socket tool (FF) to tighten the ring (DD) and secure the shade (A) in place.
Operation Turn on power at the circuit breaker or fuse box. Turn the light switch on to activate the fixture. Care and Cleaning EXTERIOR MAINTENANCE NOTE: Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully. Use a dry or slightly dampened clean cloth and wipe the surface of the fixture INTERIOR MAINTENANCE Disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Artículo 1006 331 641 1006 330 992 1006 330 588 1006 331 650 1006 403 094 Modelo HB3670-35 HB3670-336 HB3670-337 HB3670-338 HB3670-339 GUÍA DE USO Y MANTENIMIENTO LUZ DE BAÑO ELMCROFT Preguntas, problemas, o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay 8 a.m. – 7 p.m Hora del Este, Lunes – Viernes, 9 a.m. – 6 p.m., Hora del Este, Sábado 1-855-HD-HAMPTON HAMPTONBAY.
Tabla de Contenidos Tabla de Contenidos Información de Seguridad Garantía Pre-Instalación Planificación de la Instalación Herramienta Necesarias Ferretería Incluida Contenido del Paquete 10 10 10 11 11 11 11 12 Instalación Operación Cuidado y Limpieza Mantenimiento del Exterior Mantenimiento del Interior Solución de Problemas 13 15 15 15 15 15 Información de Seguridad Antes de iniciar la instalación de este aparato o la eliminación de un accesorio anterior, desconecte la alimentación apagando el disyu
Pre-instalación PLANIFICACIÓN DE LA INSTALACIÓN Lea todas las instrucciones antes del montaje e instalación. Antes de comenzar la instalación de la luminaria o el retiro de un artefacto anterior, desconecte la alimentación apagando el disyuntor o quitando el fusible en la caja de fusibles. Para evitar daños a este producto, montarlo en una superficie suave y no abrasiva, como una alfombra o cartón. NOTA: Guarde su recibo y estas instrucciones para comprobante de compra.
Pre-instalación (continuado) CONTENIDO DEL PAQUETE B A Parte Descripción Cantidad A Pantalla 1 B Cuerpo Principal 1 12
Instalación 1 CC Sujetando la ménsula de montaje Saque los cables de alimentación de la caja de distribución y monte la ménsula de montaje (EE) sobre la caja de distribución utilizando los tornillos de montaje (CC).
Instalación (continuado) 3 Ensamblando el luminario B Coloque la placa del curepo principal (B) sobre el ménsula de montaje (EE). Fije el cuerpo principal (B) al ménsula de montaje (EE) con los Tureca del Luminario (BB). BB EE 4 Ensamblando el luminario NOTA: No exceda bombilla incandescente de 60 vatios o bombillas equivalentes de CFL o LED. B Coloque la pantalla (A) de acero sobre el zócalo en el cuerpo principal (B).
Operación Conecte la alimentación en el disyuntor o caja de fusibles. Gire el interruptor de la luz para activar el aparato. Cuidado y Limpieza NOTA: No use limpiadores con químicos, solventes o abrasivos fuertes. Use sólo un paño seco para sacudir o limpiar con cuidado. MANTENIMIENTO DEL EXTERIOR Use un paño limpio y seco o ligeramente humedecido y limpie la superficie de la linterna.
Preguntas, problemas, o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay 8 a.m. – 7 p.m Hora del Este, Lunes – Viernes, 9 a.m. – 6 p.m., Hora del Este, Sábado 1-855-HD-HAMPTON HAMPTONBAY.COM Conserve este manual para futuras consultas.
Article 1006 331 641 1006 330 992 1006 330 588 1006 331 650 1006 403 094 Modèle HB3670-35 HB3670-336 HB3670-337 HB3670-338 HB3670-339 GUIDE D'UTILISATION ET D'ENTRETIEN LUMINAIRE DE BAIN ELMCROFT Questions, problèmes, pièces manquantes? Avant de retourner au magasin, appeler Hampton Bay Service à la clientèle 8:00 – 19:00, HNE, Lundi – Vendredi, 9:00 – 18:00, HNE, Samedi 1-855-HD-HAMPTON HAMPTONBAY.
Table des Matières Table des Matières Consignes de Sécurité Garantie Pré-Installation Planification du l’Installation Outils Requis Matériel Inclus Contenu du Paquet 18 18 18 19 19 19 19 20 Installation Opération Entretien et Nettoyage Entretien Extérieur Entretien Intérieur Dépannage 21 23 23 23 23 23 Consignes de Sécurité Avant de commencer l'installation de ce luminaire ou à la dépose d'un précédent luminaire, débrancher l'alimentation en désactivant le disjoncteur ou en retirant le fusible de la p
Pré-installation PLANIFICATION DE L'INSTALLATION Lire toutes les instructions avant assemblage et l'installation. Avant de commencer l'installation du luminaire ou la dépose d'un précédent luminaire, débrancher l'alimentation en désactivant le disjoncteur ou en retirant le fusible de la platine de fusibles. Pour éviter d'endommager le produit, assembler sur un doux et non abrasif surface tels que tapis ou un morceau de carton. NOTE : Conservez votre reçu et ces instructions à la preuve d'achat.
Pré-installation (suite) CONTENU DU PAQUET B A Partie Description Quantité A Abat-jour 1 B Corps du Luminaire 1 20
Installation 1 CC Montage du plaque de fixation Tirer les fils d’alimentation hors de la boîte de sortie et installez la plaque de fixation (EE) sur la boîte de sortie à l’aide des vis de montage (CC). EE 2 La connexion des fils AA NOTE : Si vous avez des questions concernant l’installation électrique, veuiller consulter le code de l’électricité en vigueur dans votre province pour connaître les méthodes de mise à la terre approuvées.
Installation (continué) 3 Montage de luminaire B Placer la plaque arrière du le corps du luminaire (B) sur les plaque de fixation (EE). Fixez le corps du Luminaire (B) au plaque de fixation (EE) à l’aide des vis de fixation (BB). EE BB 4 Assemblage de luminaire NOTE: Ne pas dépasser une ampoule incandescente de 60 Watt ou une ampoule CFL ou LED équivalente B Placer l’abat-jour en acier (A) sur la douille de le corps du luminaire (B).
Opération Mettez sous tension au niveau du disjoncteur ou des fusibles. Allumez l'interrupteur pour activer l'appareil. Entretien et Nettoyage NOTE : N’utilisez aucun produit de nettoyage contentant des agents chimiques, des solvants ou des abrasifs durs. Utilisez uniquement un linge doux et sec pour enlever la poussière en essuyant délicatement ENTRETIEN EXTÉRIEUR Utilisez un linge sec ou légèrement humide et essuyez le luminaire.
Questions, problèmes, pièces manquantes? Avant de retourner au magasin, appeler Hampton Bay Service à la clientèle 8:00 – 19:00, HNE, Lundi – Vendredi, 9:00 – 18:00, HNE, Samedi 1-855-HD-HAMPTON HAMPTONBAY.COM Conserver ce manuel pour un utilisation ultérieure.