Item: XXXX XXX XXX Model: HB3803-43 HB3803-35 HB3803-07 USE AND CARE GUIDE SIX LIGHT VANITY WAKEFIELD Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this vanity light and bathroom accessories.
Table of Contents Table of Contents Safety Information Warranty Pre-Installation Planning the Installation Tools Required Hardware Included Package Contents Installation Operation Care and Cleaning Exterior Maintenance Interior Maintenance Troubleshooting 2 2 2 3 3 3 3 4 5 8 8 8 8 8 Safety Information Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
Pre-installation PLANNING THE INSTALLATION Read all instructions before assembly and installation. Before starting installation of the fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: Keep your receipt and these instructions for Proof of Purchase.
Pre-installation (continued) PACKAGE CONTENTS A B Part Description Quantity A Fixture Body 1 B Glass Shade 6 4
Installation 1 Mounting the hardware Use the mounting bracket (GG) and mark the center hole and slots using a pencil. Repeat at the other end of the marked location. Ensure that the markings from center to center are be 22-1/4 in. (567.5 mm) apart before drilling. CC GG Drill holes at the slot markings using a drill and drill bit suitable for your wall type. Push the wall anchors (CC) in to the wall.
Installation (continued) 3 Mounting the fixture AA Place the fixture body (A) onto the mounting bracket (GG). Attach the fixture body (A) to the mounting bracket (GG) using the fixture screws (AA). A 4 Assembling the fixture A NOTE: Do not exceed a 60 watt incandescent light bulb or equivalent SBCFL or LED bulb. Slide the glass shades (B) over the sockets and onto the socket cups. B Secure the glass shades (B) to the socket cups using the socket rings (FF).
Operation Turn on power at the circuit breaker or fuse box. Turn the light switch on to activate the fixture. Care and Cleaning EXTERIOR MAINTENANCE NOTE: Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully. Use a dry or slightly dampened clean cloth and wipe the surface of the fixture. INTERIOR MAINTENANCE Disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Articulo:XXXX XXX XXX Modelo: HB3803-43 HB3803-35 HB3803-07 GUÍA DE USO Y MANTENIMIENTO LUZ DE BAÑO DE SEIS LUCES WAKEFIELD Preguntas, problemas, o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay 8 a.m. – 7 p.m Hora del Este, Lunes – Viernes, 9 a.m. – 6 p.m., Hora del Este, Sábado 1-855-HD-HAMPTON HAMPTONBAY.COM GRACIAS Le agradecemos la confianza que han depositado en Hampton Bay a través de la compra de esta luz de baño y accesorios de baño.
Tabla de Contenidos Tabla de Contenidos Información de Seguridad Garantía Pre-Instalación Planificación de la Instalación Herramienta Necesarias Ferretería Incluida Contenido del Paquete Instalación Operación Cuidado y Limpieza Mantenimiento del Exterior Mantenimiento del Interior Solución de Problemas 11 11 11 12 12 12 12 13 14 17 17 17 17 17 Información de Seguridad Antes de iniciar la instalación de este aparato o la eliminación de un accesorio anterior, desconecte la alimentación apagando el disyu
Pre-instalación PLANIFICACIÓN DE LA INSTALACIÓN Lea todas las instrucciones antes del montaje e instalación. Antes de comenzar la instalación de la luminaria o el retiro de un artefacto anterior, desconecte la alimentación apagando el disyuntor o quitando el fusible en la caja de fusibles. Para evitar daños a este producto, montarlo en una superficie suave y no abrasiva, como una alfombra o cartón. NOTA: Guarde su recibo y estas instrucciones para comprobante de compra.
Pre-instalación (continuado) CONTENIDO DEL PAQUETE A B Parte Descripción Cantidad A Cuerpo Principal 1 B Pantalla de Vidrio 6 12 HAMPTONBAY.COM Para obtener asistencia llama al 1-855-HDHAMPTON.
Instalación (continuado) la ménsula de 1 Sujetando montaje Utilice una ménsula de montaje de accesorios (GG) y marque el orificio central y las ranuras con un lápiz. Repita la operación en el otro extremo de la ubicación marcada. Asegúrese de que las marcas de centro a centro estén a 22-1/4 pulg. (567.5 mm) antes de taladrar. CC Perfore los agujeros en las marcas de las ranuras utilizando un taladro y una broca adecuados para su tipo de pared.
Instalación (continuado) 3 Ensamblando el luminario AA Coloque la placa del curepo principal (A) sobre el ménsula de montaje (GG). Fije el cuerpo principal (A) a la ménsula de montaje (GG) utilizando los tornillos de la luminaria (BB). A 4 Ensamblando el luminario A NOTA: No exceda bombilla incandescente de 60 vatios o bombillas equivalentes de CFL o LED. Deslice las pantallas de vidrio (B) sobre los zócalos en los soportes de zócalo.
Operación Conecte la alimentación en el disyuntor o caja de fusibles. Gire el interruptor de la luz para activar el aparato. Cuidado y Limpieza MANTENIMIENTO DEL EXTERIOR NOTA: No use limpiadores con químicos, solventes o abrasivos fuertes. Use sólo un paño seco para sacudir o limpiar con cuidado. Use un paño limpio y seco o ligeramente humedecido y limpie la superficie de la linterna.
Preguntas, problemas, o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay 8 a.m. – 7 p.m Hora del Este, Lunes – Viernes, 9 a.m. – 6 p.m., Hora del Este, Sábado 1-855-HD-HAMPTON HAMPTONBAY.COM Conserve este manual para futuras consultas.
Article : XXXX XXX XXX Modelé : HB3803-43 HB3803-35 HB3803-07 GUIDE D'UTILISATION ET D'ENTRETIEN LUMIÈRE DE BAIN À SIX LUMIÈRES WAKEFIELD Questions, problèmes, pièces manquantes? Avant de retourner au magasin, appeler Hampton Bay Service à la clientèle 8:00 – 19:00, HNE, Lundi – Vendredi, 9:00 – 18:00, HNE, Samedi 1-855-HD-HAMPTON HAMPTONBAY.COM MERCI Nous apprécions la confiance que vous avez placée dans Hampton Bay grâce à l'achat de cette luminaire de bain et accessoires de bain.
Table des Matières Table des Matières Consignes de Sécurité Garantie Pré-Installation Planification du l’Installation Outils Requis Matériel Inclus Contenu du Paquet Installation Opération Entretien et Nettoyage Entretien Extérieur Entretien Intérieur Dépannage 20 20 20 21 21 21 21 22 23 26 26 26 26 26 Consignes de Sécurité Avant de commencer l'installation de ce luminaire ou à la dépose d'un précédent luminaire, débrancher l'alimentation en désactivant le disjoncteur ou en retirant le fusible de la p
Pré-installation PLANIFICATION DE L'INSTALLATION Lire toutes les instructions avant assemblage et l'installation. Avant de commencer l'installation du luminaire ou la dépose d'un précédent luminaire, débrancher l'alimentation en désactivant le disjoncteur ou en retirant le fusible de la platine de fusibles. Pour éviter d'endommager le produit, assembler sur un doux et non abrasif surface tels que tapis ou un morceau de carton. NOTE : Conservez votre reçu et ces instructions à la preuve d'achat.
Pré-installation (suite) CONTENU DU PAQUET A B Partie Description Quantité A Corps du Luminaire 1 B Abat-jour en Verre 6 20
Installation (continué) 1 Montage du plaque de fixation Utilisez un plaque de montage d'accessoires (GG) et marquez le trou central et les fentes à l'aide d'un crayon. Répétez l'opération à l'autre extrémité de l'emplacement marqué. Veillez à ce que les marques de centre à centre soient espacées de 567,5 mm (22-1/4 po.) avant de percer. CC GG Percez des trous aux emplacements marqués à l'aide d'une perceuse et d'une mèche adaptées à votre type de mur.
Installation (continué) 3 Montage de luminaire AA Placer la plaque arrière du le corps du luminaire (A) sur le plaque de fixation (GG). Fixez le corps du luminaire (A) sur le plaque de fixation (GG) à l’aide des vis du luminaire (AA). A 4 Assemblage de luminaire A NOTE: Ne pas dépasser une ampoule incandescente de 60 Watt ou une ampoule CFL ou DEL équivalente B Placez les abat-jour en verre (B) par-dessus les douilles en les déposant sur boitiers de douilles.
Opération Mettez sous tension au niveau du disjoncteur ou des fusibles. Allumez l'interrupteur pour activer l'appareil. Entretien et Nettoyage ENTRETIEN EXTÉRIEUR NOTE : N’utilisez aucun produit de nettoyage contentant des agents chimiques, des solvants ou des abrasifs durs. Utilisez uniquement un linge doux et sec pour enlever la poussière en essuyant délicatement Utilisez un linge sec ou légèrement humide et essuyez le luminaire.
Questions, problèmes, pièces manquantes? Avant de retourner au magasin, appeler Hampton Bay Service à la clientèle 8:00 – 19:00, HNE, Lundi – Vendredi, 9:00 – 18:00, HNE, Samedi 1-855-HD-HAMPTON HAMPTONBAY.COM Conserver ce manuel pour un utilisation ultérieure.