Item: 240 348 Model: HB7023P-05 Item: 240 367 Model: HB7023P-06 USE AND CARE GUIDE ____________________________________ EXTERIOR WALL LANTERN Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this exterior wall lantern.
Table of Contents Table of Contents Safety Information Warranty Pre-Installation Planning the Installation Tools Required Hardware Included Package Contents 2 2 2 3 3 3 3 4 Installation Operation Troubleshooting Care and Cleaning Exterior Maintenance Interior Maintenance 5 7 8 8 8 8 Safety Information Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
Pre-Installation PLANNING THE INSTALLATION Read all instructions before assembly and installation. Before starting installation of the fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: Keep your receipt and these instructions for Proof of Purchase.
Pre-Installation (continued) PACKAGE CONTENTS A B D C Part Description Quantity A Fixture Body 1 B Hood 1 C Tail 1 D Finial (Optional) 1 4
Installation 1 Assembling the fixture NOTE: Do not exceed a 60 watt incandescent light bulb, or a 13 watt SBCFL. CC Install up to a 60 watt light bulb or a Listed SBCFL (Self-Ballasted Compact Fluorescent Lamp [not provided]) in the socket of the fixture body (A). Attach the hood (B) to the fixture body (A) using the provided hood screws (CC). Thread the tail (C) or the optional finial (D) to the bottom of the fixture body (A). B A C 5 D HAMPTONBAY.
Installation (continued) 2 Mounting the hardware Thread the fixture mounting screws (FF) into the provided holes of the mounting bracket (GG). Thread the hex nuts (BB) onto the fixture mounting screws (FF). Do not tighten the hex nuts (BB) at this time. Place the back plate of the fixture body (A) over the outlet box and onto the fixture mounting screws (FF). Adjust the fixture mounting screws (FF) until they protrude out from the back plate 1/4 in.
Installation (continued) 4 Mounting the fixture Place the back plate of the fixture body (A) onto the fixture mounting screws (FF) and secure it into place by using the lock nuts (AA) provided. Caulk the upper 2/3rds of the back plate on the fixture body (A). Leave the bottom 1/3rd un-caulked for drainage of any water that may leak into the enclosure. A AA FF Operation Turn on power at the circuit breaker or fuse box. Turn the light switch on to activate the fixture.
Troubleshooting Problem Solution The light will not turn on. The fuse blows or circuit breaker trips when light is turned on. Check the wire connections. Make sure the power supply is on. Test or replace the switch. Check the wiring. Replace the driver. Care and Cleaning EXTERIOR MAINTENANCE NOTE: Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.
This page is intentionally left blank. 9 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Artículo: 240 348 Modelo: HB7023P-05 Artículo: 240 367 Modelo: HB7023P-06 GUÍA DE USO Y MANTENIMIENTO ____________________________________ FAROL DE PARED PARA EXTERIORES Preguntas, problemas, o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay 8 a.m. – 7 p.m., Hora del Este, Lunes – Viernes, 9 a.m. – 6 p.m., Hora del Este, Sábado 1-855-HD-HAMPTON HAMPTONBAY.
Tabla de Contenidos Tabla de Contenidos Información de Seguridad Garantía Pre-Instalación Planificación de la Instalación Herramienta Necesaria Ferretería Incluida Contenido del Paquete 12 12 12 13 13 13 13 14 Instalación Operación Solución de Problemas Cuidado y Limpieza Mantenimiento Exterior Mantenimiento Interior 15 17 18 18 18 18 Información de Seguridad Antes de iniciar la instalación de este aparato o la eliminación de un accesorio anterior, desconecte la alimentación apagando el disyuntor o q
Pre-Instalación PLANIFICACIÓN DE LA INSTALACIÓN Lea todas las instrucciones antes del montaje e instalación. Antes de comenzar la instalación de la luminaria o el retiro de un artefacto anterior, desconecte la alimentación apagando el disyuntor o quitando el fusible en la caja de fusibles. Para evitar daños a este producto, montarlo en una superficie suave y no abrasiva, como una alfombra o cartón. NOTA: Guarde su recibo y estas instrucciones para comprobante de compra.
Pre-Instalación (continuado) CONTENIDO DEL PAQUETE A B D C Parte Descripción Cantidad A Cuerpo Principal 1 B Cubierta 1 C Cola Decorativa 1 D Punta Decorativa (Opcional) 1 14
Instalación 1 Ensamblando el luminario NOTA: No exceda de un foco incandescente de 60 vatios o un foco fluorescente compacto con balasto integrado de 13 vatios. CC Instale un foco de hasta 60 vatios o un foco fluorescente compacto con balasto integrado [no incluido] en el portafocos del cuerpo principal (A). No exceda de un foco incandescente de 60 vatios o un foco fluorescente compacto con balasto integrado de 13 vatios.
Instalación 2 Montando la ferretería Enrosque los tornillos del luminario (FF) en los agujeros provistos en la ménsula de montaje (GG). Enrosque las tuercas hexagonales (BB) en los tornillos del luminario (FF). No apriete las tuercas hexagonales (BB) en este momento. EE Saque los cables de alimentación de la caja de distribución y monte la ménsula de montaje (GG) sobre la caja de distribución utilizando los tornillos de la ménsula (EE).
Instalación (continuado) 4 Montando la linterna Coloque la placa del cuerpo principal (A) sobre los tornillos del luminario (FF) y asegúrela con las tuercas de seguridad (AA) que se incluyen. Calafatee las 2/3 partes superiores de la placa del cuerpo principal (A) en la superficie de montaje. Deje la 1/3 parte inferior sin calafatear para el drenaje del agua que se pueda filtrar en el encierro. A AA FF Operación Conecte la alimentación en el disyuntor o caja de fusibles.
Solución de Problemas Problema Solución La luz no se enciende. Asegúrese de que la energía eléctrica esté encendida. Pruebe o cambie el interruptor. Verifique los cableado. Reemplace el controlador. El fusible se funde o el disyuntor de circuitos se dispara cuando se enciende la luz. Verifique las conexiones de los cables. Cuidado y Limpieza MANTENIMIENTO DEL EXTERIOR NOTA: No use limpiadores con químicos, solventes o abrasivos fuertes.
Esta página ha sido dejada en blanco intencionalmente. 19 HAMPTONBAY.COM Para obtener asistencia llama al 1-855-HD-HAMPTON.
Preguntas, problemas, o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay 8 a.m. – 7 p.m., Hora del Este, Lunes – Viernes, 9 a.m. – 6 p.m., Hora del Este, Sábado 1-855-HD-HAMPTON HAMPTONBAY.COM Conserve este manual para futuras consultas.
Article: 240 348 Modèle: HB7023P-05 Article: 240 367 Modèle: HB7023P-06 GUIDE D'UTILISATION ET D'ENTRETIEN ____________________________________ LANTERNE MURALE D’EXTÉRIEUR Questions, problèmes, pièces manquantes? Avant de retourner au magasin, appeler Hampton Bay Service à la clientèle 8:00 – 19:00, HNE, Lundi – Vendredi, 9:00 – 18:00, HNE, Samedi 1-855-HD-HAMPTON HAMPTONBAY.
Table des Matières Table des Matières Consignes de Sécurité Garantie Pré-Installation Planification du l’Installation Outils Requis Matériel Inclus Contenu du Paquet 22 22 22 23 23 23 23 24 Installation Opération Dépannage Entretien et Nettoyage Entretien Extérieur Entretien Intérieur 25 27 28 28 28 28 Consignes de Sécurité Avant de commencer l'installation de ce luminaire ou à la dépose d'un précédent luminaire, débrancher l'alimentation en désactivant le disjoncteur ou en retirant le fusible de la
Pré-Installation PLANIFICATION DE L'INSTALLATION Lire toutes les instructions avant assemblage et l'installation. Avant de commencer l'installation du luminaire ou la dépose d'un précédent luminaire, débrancher l'alimentation en désactivant le disjoncteur ou en retirant le fusible de la platine de fusibles. Pour éviter d'endommager le produit, assembler sur un doux et non abrasif surface tels que tapis ou un morceau de carton. NOTE: Conservez votre reçu et ces instructions à la preuve d'achat.
Pré-Installation (continue) CONTENU DU PAQUET A B D C Partie Description Quantité A Corps du Luminaire 1 B Capot 1 C Queue Décoratif 1 D Faîteau Décoratif 1 24
Installation 1 L'assemblage de luminaire NOTE: La puissance de la lampe ne doit pas dépasser 60 watts ou 13 watts dans le cas d’une lampe fluocompacte à ballast intégré. CC Installez une lampe de 60 watts maximum ou une lampe fluocompacte à ballast intégré (non comprise) dans la douille du corps du luminaire (A). La puissance de la lampe ne doit pas dépasser 60 watts ou 13 watts dans le cas d’une lampe fluocompacte à ballast intégré.
Installation (continue) 2 Le montage du matériel Vissez les vis du luminaire (FF) dans les trous prévus sur la plaque de fixation (GG). Vissez les écrous hexagonaux (BB) sur les vis du luminaire (FF). Ne pas serrer les écrous hexagonaux (BB) pour l’instant. Tirez les fils d’alimentation hors de la boîte de sortie et installez la plaque de fixation (GG) sur la boîte de sortie à l’aide des vis de montage (EE).
Installation (continue) 4 Le montage de la lanterne Placez la plaque arrière du le corps du luminaire (A) sur les vis du montage (FF) et le fixer en place à l'aide des écrous de serrage (AA) fournies. Calfeutrez les deux tiers supérieurs du la plaque arrière du le corps du luminaire (A). Laissez le tiers inférieur du joint non calfeutré de manière à permettre l’écoulement de l’eau qui pourrait s’infiltrer dans cet espace.
Dépannage Problème Solution La lumière ne s'allume pas. Le fusible brûle ou le disjoncteur saute lorsqu'on allume le luminaire. Vérifiez les connexions électriques. Ouvrez l'interrupteur ou le disjoncteur. Vérifiez ou remplacez l'interrupteur. Vérifiez les connexions électriques. Remplacer le contrôleur. Entretien et Nettoyage ENTRETIEN EXTÉRIEUR NOTE: N’utilisez aucun produit de nettoyage contentant des agents chimiques, des solvants ou des abrasifs durs.
Cette page est intentionnellement laissée en blanc. 29 HAMPTONBAY.COM Veuillez contacter le 1-855-HD-HAMPTON pour obtenir plus aide.
Questions, problèmes, pièces manquantes? Avant de retourner au magasin, appeler Hampton Bay Service à la clientèle 8:00 – 19:00, HNE, Lundi – Vendredi, 9:00 – 18:00, HNE, Samedi 1-855-HD-HAMPTON HAMPTONBAY.COM Conserver ce manuel pour un utilisation ultérieure.