Instructions / Assembly

HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
1
Mounting the hardware
 Thread the two hex nuts (BB) onto the
nipple (FF) to its approximate midpoint.
 Thread the nipple (FF) through the center
hole of the mounting bracket (HH)
approximately 1/3
rd
of the way.
 Do not tighten hex nuts (BB) at this time.
 Pull the supply wires out from the outlet
box and attach the mounting bracket (HH)
to the outlet box by using the mounting
screws (GG).
 Thread the collar loop (EE) 8 to 9 turns
onto the bottom end of the nipple (FF).
 Tighten the bottom hex nut (BB) against
the screw collar loop (EE).
2
Aligning the collar
 Align the bottom surface of the canopy (C)
with the midpoint of the screw collar loop
(EE).
 Remove the canopy (C) and tighten the top
hex nut (BB) against the mounting bracket
(HH).
Installation
5
EE
C
BB
HH
FF
GG
EE
HH
BB
FF