Instructions / Assembly

HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
5
Hanging the assembly
 Slide the threaded ring (DD) onto the chain
(D) followed by the canopy (C).
 Hook the previously opened chain link onto
the top of the chain (D) and onto the
screw collar loop (EE).
 Close the open chain link using pliers.
6
Adjusting the wire length
 Feed the cord and fixture ground wire into
the center hole of the screw collar loop
(EE) into the nipple (FF), through the other
end, and out of the outlet box.
 Continue feeding the cord and fixture
ground wire until there is no slack
remaining.
 Allow 6 in. of excess cord to extend from
the outlet box and cut off any excess.
 Separate the ribbed wire and the smooth
wire and strip off 3/8 in. of insulation from
each wire.
Installation (continued)
7
A
C
D
EE
DD
EE
BB
GG
HH
D
FF