Instructions / Assembly

Page 6
PARTS INCLUDED FOR INSTALLATION (parts are not to
scale):
INSTALLATION INSTRUCTIONS:
3 ea Wire
Nuts (#14)
2 ea Bracket Mounting
Screws (#8)
1. Thread the Nipple (#6) into the provided hole of the Mounting Bracket (#7) as shown. Thread the Hex Nut (#9) onto the
Nipple (#6), as shown. Do not tighten the Hex Nut (#9) at this time.
2. Pull the power supply wires out from the Outlet Box (#4), and mount the Mounting Bracket (#7) to the Outlet Box (#4), using
the Bracket Mounting Screws (#8).
3. Attach the Black Supply Wire (#5) to the Black Fixture Wire (#12) and the White Supply Wire (#16) to the White Fixture Wire
(#13) using Wire Nuts (#14). Connect the Fixture Ground Wire (#11) and the Supply Ground Wire (#15) together using a
Wire Nut (#14). Wrap all wire connections with electrical tape for a more secure connection. Note: If you have electrical
questions, consult your local electrical code for approved grounding methods.
4. Place the Fixture Pan (#1) over the Outlet Box (#4) and onto the Nipple (#6), and adjust the Nipple (#6) until it protrudes out
from the Fixture Pan (#1) 1/4". Remove the Fixture Pan (#1) and secure the position of the Nipple (#6) by tightening the Hex
Nut (#9) against the Mounting Bracket (#7). Place the Fixture Pan (#1) back onto the Nipple (#6), and secure it into place using
the Lock Nut (#3) provided.
5. Installation is complete. Turn on power at the circuit breaker or fuse box. Turn the light switch on to activate the fixture.
1 ea Mounting
Bracket (#7)
1 ea Nipple (#6)
1 ea Hex
Nuts (#9)
1 ea Lock
Nuts (#3)