Instructions / Assembly

3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Installation
PLANNING INSTALLATION
Before installing the light xture, ensure that all parts are present. Compare parts with the Hardware Included and
Package Contents sections. If any part is missing or damaged, do not attempt to assemble, install, or operate this
light xture.
Estimated installation time: 30 minutes
SPECIFICATIONS
Range
Up to 30 ft. (9.1 m) (Varies with surrounding temperature)
Sensing angle
Up to 180°
Electrical load
Up to 60 watt maximum incandescent
Bulb type
Medium base, type “A”, 60 watt maximum
Sensor capacity
Up to 360 Watt (3.0 A) maximum tungsten
Power requirements
120 VAC, 60 Hz
Operating modes
Test, Motion activated, Manual
Time delay
1, 5, 10 minutes
DualBrite timer
Off, 3 hours, 6 hours, dusk-to-dawn
TOOLS REQUIRED
Phillips
screwdriver
1/8 in. Flathead
screwdriver
Wire strippers/
cutters
Circuit tester Work gloves
Silicone
sealant
Ladder Safety goggles