Instructions / Assembly
5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation
1
Removing the mounting
bracket
□ Remove the two decorative xture nuts (CC)
from the light xture (A).
□ Remove the mounting bracket (FF) from the
light xture (A).
2
Installing the mounting bracket
WARNING: Turn the power off at the circuit breaker or
fuse. Place tape over the circuit breaker switch and verify
power is off at the light xture.
□ Remove the existing light xture.
□ Tighten the two large mounting screws (DD)
nger tight into the mounting bracket (FF).
□ Attach the mounting bracket (FF) to the
junction box (not included) securely with the
two mounting bracket screws (AA).
□ Firmly pull on the mounting bracket (FF) to
verify it is securely mounted to the junction
box. If necessary, use the screws that were
removed from the existing light xture.
FF
CC
DD
A
DD
FF
AA