Instructions / Assembly

HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
1
Mounting the hardware
 Align the fixture pan (A) over the outlet
box.
 Mark the location of the keyhole slots of
the fixture pan (A) onto the ceiling.
Remove the fixture pan (A) from the
ceiling.
 Drill a 1/4 in. hole at the narrow end of
each keyhole slot marking on the ceiling.
 Carefully hammer a ceiling anchor (CC)
into each drilled hole.
 Screw a mounting screw (BB) into each
ceiling anchor (CC), but allow a small
portion of the mounting screw (BB) to
remain away from the ceiling.
2
Connecting the wires
 Pull the power supply wires out from the
outlet box.
 Connect the black supply wire to the
black fixture wire using wire nuts (AA).
 Connect the white supply wire to the
white fixture wire using wire nuts (AA).
 Connect the fixture ground wire and the
supply ground wire together using a wire
nut (AA).
 Wrap all wire connections with electrical
tape for a more secure connection.
Installation
5
NOTE: If you have electrical questions consult
your local electrical code for approved
grounding methods.
AA
CC
A
CC
BB
A