Instructions / Assembly

Page 5
7. Insert each wire conductor into it respective terminal, as shown. Tighten the Terminal
Screws (#10) securing all wires into their terminals. (Fig. 1)
8. Carefully tuck all wires into the Outer Sleeve (#8) and place the Outer Sleeve Cover (#9)
back onto the Outer Sleeve (#8), making sure the springs a located in their original positions.
Secure it in place using the Cover Screws (#7). (Fig. 1)
9. Slide the Glass Shade (#2) onto the Socket (#6) of the Pendant (#1). (Fig. 2)
10. Thread the Socket Ring (#3) onto the Socket (#6) of the Pendant (#1) to secure the Glass
Shade (#2). (Fig. 2)
11. Insert the G9 Bi-pin Light Bulb (#4) into the Socket (#6) of the Pendant (#1). (Fig. 2)
12. Thread the Bulb Protector (#5) onto the Socket (#6) of the Pendant (#1), covering the G9 Bi-
pin Light Bulb (#4). (Fig. 2)
ASSEMBLY:
7. Cover Screw
8. Outer Sleeve
9. Outer Sleeve Cover
10. Terminal Screw
11. Black Wire
12. White Wire
13. Green Wire
14. Strain Relief
Screw
15. Cable
Fig. 1
16. Knot