Instructions / Assembly

ManualsBrandsHampton Bay ManualsKitchenRhodes 58-1/2 in. Bronze Floor Lamp with TTL 20 Compliant Fixture

Page 2

Thank you for purchasing this Hampton Bay interior portable luminaire. This

product has been manufactured to the highest standards of safety and quality.

The durable finish and hard backs shade design provide for care-free

maintenance. Simply wipe with a clean towel to keep looking showroom new.

FEATURES:

1. Durable easy to maintain finish; simply wipe with a clean soft cloth to

keep looking new.

2. On/off switch provides just the right amount of light where it is needed.

3. Popular E27 lamp holder may be fitted with a CFL equivalent energy-

saving bulb.

QUESTIONS, PROBLEMS, MISSING PARTS:

Before returning to your local Home Depot, please call our Customer Service

Team at 1-877-527-0313 or visit www.homedepot.com

. Please reference your

SKU 590-098 Rhodes Bronze Floor Lamp with CFL Bulb when speaking to a

Customer Service agent.

CAUTION:

1. Before starting to assemble your portable luminaire, spread all parts out on

a clean flat surface. Inspect each part for defects that may have occurred

during shipping.

Important

: Inspect the wire insulation for any cuts, abrasions or exposed

copper that may have resulted during shipping. If there is a defect in the wire,

DO NOT continue the assembly operation. Please call our Customer Service

Team at 1-877-527-0313.

2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY

ELECTRICAL QUESTIONS.

3. Keep your receipt and these Instructions for Proof of Purchase.

Page 3

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):

1 ea – Finial (A) 1 ea – Shade (B) 1 ea—Harp (C) 3 ea – Tubes (F, G, H)

1 ea – Socket 1 ea - Body (E) 1 ea—Base (I) 1 ea—Light Bulb (J)

Assembly (D)

ASSEMBLY INSTRUCTIONS:

1. Screw Socket Assembly (D) clockwise into

Body (E) until secure; pull any excess cord

through Body (E).

2. Screw Body (E) clockwise into Tube (F) until

secure; pull any excess cord through Tube (F).

3. Repeat Step 2 for Tubes (G) and (H).

4. Screw Tube (H) clockwise into Base (I) until

secure; pull any excess cord through Base (I).

5. Install Harp (C) to the Under Harp of Socket

Assembly (D).

6. Install a 150-watt maximum Type A (or CFL

equivalent) bulb (J) into Socket Assembly

(D).

7. Install Shade (B) over Harp (C); secure by

screwing Finial (A) clockwise to Harp (C).