Instructions / Assembly

Assembly (continued)
Attaching the seat and back
combination to the chair base
3
Completing the assembly
4
6
C
A
B
E
D
HH
BB
DD
JJ
JJ
FF
CC
II
With the help of another person, turn over the newly
completed chair base (A, B, D, and E) and carefully align
with the seat and back combination (C). Attach in order,
using bolts (BB), metal washer (DD), small rectangular
steel plate (JJ), seat and back combination (C), T-Rock (E),
small rectangular steel plate (JJ), lock washer (FF),
and nuts (CC).
IMPORTANT: Bolts are inserted from underneath the
seat (closest to woven wicker seat) through crossbar into
T-rock. Two rectangular steel plates are used for each side
in sequence as noted above.
Tighten all the bolts and nuts with hex wrenches, and
then cover with plastic caps (GG, HH and II).
Carefully turn over the completed chair frame.
Your chair is now ready for use, so relax & enjoy!
NOTE:
If the chair frame does not align between the
arms, unscrew all bolts and re-adjust the chair frame
accordingly. Do not tighten completely until assembly is
completed.