Item #639356 Model #HD14500 USE AND CARE GUIDE 5-PIECE LYNNFIELD CHAT SET ( 4-Piece Chat Chairs ) Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8:00 a.m. - 6:00 p.m., EST, Monday-Friday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this chat set. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents..........................................................2 Safety Information.........................................................2 Warranty.........................................................................2 Pre-Assembly...............................................................3 Planning Assembly ...................................................3 Hardware Included................................................... 3 Package Contents.....................
Pre -Assembly PLANNING ASSEMBLY It will take two people about 20 minutes to complete the assembly process. Assemble this product on a blanket or towel or other soft, non-abrasive surface to avoid scratching the finish. HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Assembly (continued) PACKAGE CONTENTS _______A _______D _______B _______E _______C _______F Part A Description Quantity Chair Arm (Right When Sitting) 4 B Chair Arm (Left When Sitting) 4 C Chair Back 4 D E Chair Seat Seat Cushion 4 4 F Back Cushion 4 4
Assembly the chair back to 1 Attaching the right arm 2 Place the right chair arm (A) on its side. Align the chair back (C) with the chair arm (A) in both the bottom and top sections. Start with the bottom sections and insert bolts (BB) with metal washers (DD) through each of the 2 holes of the bottom section of the chair back (C) and bottom section of the chair arm (A). Loosely tighten with the hex wrench.
Assembly (continued) the left arm to the 3 Attaching chair back and seat the bolts and covering with 4 Tightening the bolt caps Repeat steps 1 and 2 for the left chair arm (B) by attaching in all three places, the top of the chair, rear back of the chair, and the front of the chair. Tighten all the bolts using the hex wrench (FF) and then cover them securely with the plastic bolt caps (EE).
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8:00 a.m. - 6:00 p.m., EST, Monday-Friday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Item #639358 Model #HD14500 USE AND CARE GUIDE 5-PIECE LYNNFIELD CHAT SET ( 40 in. Round Chat Table ) Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8:00 a.m. - 6:00 p.m., EST, Monday-Friday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this chat set. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents..........................................................2 Safety Information.........................................................2 Warranty.........................................................................2 Pre-Assembly...............................................................3 Planning Assembly....................................................3 Hardware Included....................................................3 Package Contents....................
Pre -Assembly PLANNING ASSEMBLY It will take two people about 10 minutes to complete the assembly process. Assemble this product on a blanket or towel or other soft, non-abrasive surface to avoid scratching the finish. HARDWARE INCLUDED NOTE: Hardware not shown to actual size. _____AA Part AA BB CC DD Description Bolt (M6 x 15 mm) Metal Washer Plastic Bolt Cap Hex Wrench _____BB _____CC _____DD Quantity 12 12 12 1 3 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly (continued) PACKAGE CONTENTS _______A ______B _______C _______D Part Description Quantity A Table Top Rim 1 B Table Leg 4 C Table Shelf 1 D Glass 1 4
Assembly the table legs to 1 Attaching the table top rim 2 Assembling the table shelf to the legs Attach the table shelf (C) to the four legs (B) by inserting bolts (AA) with metal washers (BB) through the holes on the inside of the legs. Place the table top rim (A) upside down so the pre-drilled corner holes are visible. Next, attach the four table legs (B) to the table rim (A) by inserting the bolts (AA) with metal washers (BB) through the pre-drilled holes. Loosely tighten with the hex wrench (DD).
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8:00 a.m. - 6:00 p.m., EST, Monday-Friday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
