Use and Care Manual
12
Assembly (continued)
10 Fitting the reector handle
□ Using the pre-tted R-clip (1) and pin (2), secure the
reector handle (K) to the bracket as shown.
2
1
K
9 Attaching the regulator and propane
bottle
□ Connect the lantern and hose (H) to the regulator (J) and
secure tightly with the adjustable wrenches.
□ Screw the regulator (J) onto the gas cylinder (turn
clockwise to tighten it securely).
□ Position the gas cylinder inside the cylinder chamber as
shown securing with the chain.
□ Perform a Leak Test (see page 16).
NOTE: THE CYLINDER MUST BE POSITIONED AS SHOWN IN
THE PATIO HEATER CYLINDER CHAMBER TO PROVIDE VAPOR
WITHDRAWAL.
H
J