Instructions / Assembly

5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation
1
Assembling the xture
NOTICE: The spike is located inside the post.
WARNING: Never push the xture into the ground by the
xture head or use a hammer to insert the spike into the
ground.
□ Attach each top cap (A) onto each lens by pressing it
downward on the lens (B). Attach the lens to the post by
pressing them together.
□ Attach the plastic spike (D) to the post (C) by pressing them
together.
2
Replacing the battery
NOTICE: This operation should be done in the morning on a sunny
day. This will allow the lantern to receive a full 8 hours of sunlight so
that the rechargeable battery/batteries can reach maximum capacity.
□ Remove the top cap (A) by pulling upwards.
□ Remove the 3 screws securing the battery cover.
□ Remove the old battery and replace it with a new AA size
1.2V rechargeable battery of same or greater mAh.
NOTICE: Clean the battery contacts and those of the device prior to
battery installation.
□ Be sure to insert the battery in the proper direction.
□ Replace the battery cover.
□ Replace the top cap (A) by pushing downwards.
C
B
A
D
A
Battery
Battery Cover