Warranty
ATTENTION
SPIKE
IS INSERTED
IN POST
ATTENTION
LE PIQUET
EST INSÉRÉ
DANS LE POTEAU
Item #1002 629 570
Model #HD28583
Use and Care Guide
SOLAR PATHLIGHT
PACKAGE CONTENTS
Assembly and Installation
1
Attaching and installing the light
3
Battery replacement
2
Installation tips
Please read and save these instructions
Part Description Quantity
A
Top cap
6
B
Cage
6
C
Post
6
D
Spike
6
q If the solar panel is covered by a protective lm, remove it before using
the product. Remove the pull-tab from the battery door. Place the solar
light in a location where it can receive a full 8 hours of sunlight to allow
the rechargeable battery/batteries to reach maximum capacity.
q If the soil is of a loose, sandy or organic type, grasp the post with both
hands near the spike and rmly push into the ground.
q If the soil is hard, pour some water onto the ground to soften it.
q If the soil is stony, soften the ground with a rake or shovel and remove
large rocks. Dig a small hole, insert the xture spike, replace the soil and
tap down.
q Never push the xture into the ground by the xture head.
q Attach the spike (D) to the post (C) by pressing them together and press
the post into the bottom of the cage base (B).
q Install the bulb on the top cap (A) by turning it clockwise to lock on
the base.
q Install the top cap (A) by turning it clockwise on top of the cage (B).
qRemove the top cap (A) by turning it counterclockwise.
qRemove the bulb by turning it counterclockwise.
qRemove the battery cover.
qRemove the old battery and replace with 1 new AA NiMh
rechargeable battery of same or greater mAh.
(USE RECHARGEABLE BATTERIES ONLY).
qBe sure to insert the battery in proper direction.
qReplace the battery cover.
qReplace the bulb by turning it clokwise.
qReplace the top cap by turning clockwise.
A
B
D
C
A
B
D
C
D
Pull-tab
Bulb
Battery
Battery cover
LED
A
CAUTION: The light element is fragile. Please be careful not to touch when
removing the bulb to change the battery.
WARNING: When planting the spike ensure that there are no underground utility
lines or pipes.
NOTE: This operation should be done in the morning on a sunny day. This will allow
the light to receive a full 8 hours of sunlight so that the rechargeable battery can reach
maximum capacity.
Note : Clean the battery contacts and those of the device prior to battery installation.