SDS

Safety Data Sheet
Date of Issue: July, 24, 2017 File No.: GRP20170720WERCS01
Page 6 of 16
mg/m3inhalablefraction
TWA: 0.02mg/m
3
Mn
TWA: 0.1 mg/m
3
Mn
Ceiling: 5 mg/m
3
fume Ceiling:
5mg/m
3
Mn
ST： 3 mg/m
3
Potassium-hydroxide
1310-58-3
TWA：C 2 mg/m
3
(vacated) Ceiling: 2 mg/m
3
TWA：C 2mg/m
3
Copper 7440-50-8
TWA: 0.2 mg/m
3
fume
TWA: 1mg/m
3
Cu dust
and mist
TWA: 0.1 mg/m
3
fume
TWA: 1 mg/m
3
dust and mist
(vacated) TWA: 0.1 mg/m
3
Cu
dust, fume, mist
IDLH: 100 mg/m
3
dust,
fume and mist
TWA: 1 mg/m
3
dust and
mist
TWA: 0.1 mg/m
3
fume
Aluminum
7429-90-5
TWA:1mg/m
3
TWA：15mg/m
3
total dust
TWA: 5mg/m
3
respirable fraction
(vacated)
TWA:10mg/m
3
Total dust
TWA:5mg/m
3
Respirable
dust
Sodium-hydroxide
1310-73-2
TWA：C2 mg/m
3
OSHA: 10 mg/m
3
TWA:C2 mg/m
3
IDLH: 10 mg/m
3
TWA：2 mg/m
3
Cobalt hydroxide
21041-93-0
TWA 0.1 mg/m
3
-
-
ACGIH TLV: American Conference of Governmental Industrial Hygienists-Threshold Limit Value
OSHA PEL：Occupational Safety and Health Administration-Permissible Exposure Limits
NIOSH IDLH Immediately Dangerous to Life or Health
Other Exposure Guidelines:
Vacated limits revoked by the court of Appeals decision in AFL-CLO v. OSHA, 965F, 2d
962(11th Cir., 1992) See section 15 for national exposure control parameters.
8.2 Appropriate engineering controls
Engineering Measures:
Showers、 Eyewash stations、Ventilation systems
8.3 Individual protection measures, such as personal protective equipment
Respiratory protection : No protective equipment is needed under normal use conditions. If
exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be
required.
Eye /face protection: if splashes are likely to occur: Wear safety glasses with side shields(or
goggles). None required for consumer use.
Skin protection: Wear protective gloves and protective clothing. Long sleeved clothing.
Imperious gloves.
Hygiene Measure: Handle in accordance with good industrial hygiene and safety practice.
Do not eat, drink or smoke when using this product. Take off contaminated clothing and
wash before reuse. Avoid contact with skin, eyes or clothing. Wear suitable gloves and
eye/face protection. Wash hands before breaks and immediately after handling the product.
For environmental protection, remove and wash all contaminated protective equipment
before re-use. No information available.