Instructions / Assembly
Installation
5
□
Installing the crossbar assembly
AA
AA
BB
1
2
Secure the crossbar assembly (AA) to the outlet box (not
included) with the outlet box screws (BB). Tighten until snug.
NOTE: The preassembled mounting screws on
the crossbar should protrude outward.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
3
Test tting ceiling canopy on the xture body to the crossbar assembly
□
□
Fit the ceiling canopy (2) on the xture body (A) to the crossbar
assembly (AA) and secure with the mounting balls (1).
*If this does not work, adjust the length of the mounting
screws on the crossbar assembly (AA) by unscrewing the
preassembled hex nuts.
*Then, screw the mounting screws in or out of the crossbar
assembly (AA) until the desired length is achieved.
Once the ceiling canopy (2) on the xture body (A) is secure,
remove the mounting balls (1) and xture body (A) and
proceed to Step 4.
Preparing the crossbar assembly
1
□
□
Unscrew the two mounting balls (1) from the xture body (A).
Remove the crossbar assembly (AA) from the xture body (A) and
keep the crossbar assembly (AA) and two mounting balls (1) for
later use.
NOTE: The ceiling canopy (2) should be snug against
the ceiling and the mounting balls (1).
2
1
A
AA