Instructions / Assembly
Care and Cleaning
Troubleshooting
□
□
Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully.
To clean the xture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box, and use a dry or
slightly dampened, clean cloth to wipe the exterior surface of the xture.
7
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
NOTE: Use one 60W maximum medium base (E26)
type "S" or 8W maximum medium base (E26)
self-ballasted LED vintage Edison bulb (sold separately).
□
□
7
Installing the xture body to the outlet
box
Reattach ceiling canopy (2) on the xture body (A) to the
crossbar assembly (AA).
Secure with the previously removed mounting balls (1).
□
□
□
□
□
□
□
Problem Possible Cause Solution
The light(s) will not turn on. The bulb is burned out. Replace the light bulb.
The power is off. Ensure the power supply is turned on.
There is a faulty switch. Test or replace the switch.
Check the wiring.
There is a faulty wire connection.
The fuse blows or the circuit breaker
trips when the light is turned on.
There are crossed wires, or the power
wire is grounding out.
Discontinue use of the lamp.
Check the wire connections.
Contact a qualied electrician or call the Customer Care
Service Team at 1-855-HD-HAMPTON.
Installation (continued)
□
8
Installing the light bulb
Install the correct bulb (not included) referring to xture
markings and/or labels for maximum wattage.
2
1
A
AA