Item # 319 140 319 / 1007 075 660 Model # HD6420B USE AND CARE GUIDE FLOOR LAMP Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this light. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents ........................................................... 2 Safety Information ......................................................... 2 Warranty ......................................................................... 2 Three (3) Year Warranty ............................................................. 2 What is Covered ....................................................................... 2 What is Not Covered ....................................................
Pre-Installation PLANNING INSTALLATION □ Read all instructions before installing. □ To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard. NOTE: This product requires one 100W maximum 3-way medium base (E26) type "A" or 16 W maximum 3-way medium base (E26) self-ballasted LED bulb (sold separately). IMPORTANT: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping.
Installation 1 Installing the rods and the socket assembly □ Thread the rods (E/F/G) and the socket assembly (D) together as shown. Hand tighten until snug. As you thread the rods (E/F/G) and the socket assembly (D) together, continuously pull the power cord (H) from the bottom of the rod (F). D E E F G H 2 Installing the harp □ □ Insert the harp (C) prongs into the saddle of the socket assembly (D).
Installation (continued) 3 Installing the shade and the light bulb □ □ □ □ A Unscrew the finial (A) from the harp (C). Place the shade (B) onto the harp (C), and secure the shade (B) with the finial (A). Install the correct bulb (not included) referring to fixture markings and/or labels for maximum wattage. Plug the power cord (H) into the outlet, turn on the switch and enjoy.
Care and Cleaning □ Use a dry, soft cloth to dust or wipe carefully. □ Do not clean with abrasive materials, bleach, or solvents. Troubleshooting Problem Possible Cause Solution The lights will not turn on. The bulb is burned out. The power is off. The cord is not plugged in. The circuit breaker is off. There is an exposed wire. □ Replace the light bulb. □ Ensure the power supply is turned on. □ Ensure the cord is plugged into an outlet. □ Ensure the circuit breaker is set in the “ON” position.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Articulo # 319 140 319 / 1007 075 660 Modelo # HD6420B GUÍA DE USO Y MANTENIMIENTO LÁMPARA DE PIE ¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay, de 8 a.m. a 7 p.m., hora estándar del Este, de Lunes a Viernes, y de 9 a.m. a 6 p.m., hora estándar del Este, Sábados. 1-855-HD-HAMPTON HAMPTONBAY.COM GRACIAS POR TU COMPRA. Apreciamos la confianza que has depositado en Hampton Bay al comprar esta lámpara.
ÍNDICE Índice............................................................................... 2 Información de seguridad.............................................. 2 Garantía........................................................................... 2 Tres (3) años de garantía............................................................. 2 Lo que está cubierto.................................................................... 2 ¿Qué no está cubierto?........................................................
Antes de la instalación Planificación de la instalación □ Lea todas las instrucciones antes de realizar la instalación. □ Coloque este producto sobre una superficie suave y no abrasiva, como una alfombra o una base de cartón, para evitar dañarlo. IMPORTANTE : Revisa que el aislamiento de los cables no haya sufrido ningún corte, abrasión ni tenga filamentos de cobre expuestos debidos al envío. Si hay un defecto en el cable suspende el ensamblaje.
Instalación 1 Instalación de la varillas y del conjunto del casquillo □ Enrosque las varillas (E/F/G), el ensamblaje del enchufe (D) y la base (H) juntos como se muestra en el diagrama. Apriete a mano hasta que quede ajustado. A medida que conecta las columnas (E/F/G) et el conjunto de enchufe (D) , tire continuamente el cable de alimentación (H) desde la parte inferior de la varilla (F).
Instalación (continuación) 3 Instalación de la pantalla y de la bombilla □ □ □ □ A Desenrosque el remate (A) del arpa (C). Coloque la pantalla (B) en el arpa (C) y asegure la pantalla (B) con el remate (A). Instale la bombilla correcta (no incluida) consultando las marcas de la lámpara y/o las etiquetas para saber la potencia máxima en vatios. Enchufe el cable de alimentación (H) a la toma de corriente, gire el interruptor y disfrute.
Cuidado y limpieza □ Utilice un paño seco y suave para quitar el polvo o limpiar con cuidado. □ No limpie con materiales corrosivos, lejía o solventes. Solución de problemas Problema Causa posible Las luces no se ENCIENDEN Solución □ Reemplace las bombillas. La bombilla está quemada. □ Asegúrese de que el suministro de electricidad esté encendido. No hay alimentación. El cable de alimentación no está conectado. □ Asegúrese de que el cable de alimentación esté conectado a la toma de corriente.
¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay, de 8 a.m. a 7 p.m., hora estándar del Este, de Lunes a Viernes, y de 9 a.m. a 6 p.m., hora estándar del Este, Sábados. 1-855-HD-HAMPTON HAMPTONBAY.COM Conserva este manual para referencias futuras.