Instructions / Assembly

Pre-Assembly

PLANNING ASSEMBLY

Before You Start, check the contents of the box and make sure you have all the parts and ttings listed. If not, contact our Customer Service

at (678) 534 2876. When you are ready to start, make sure that you have the right tools at hand, plenty of space and a clean dry area for

assembly.

TOOLS REQUIRED

Adjustable

wrench x 2

1/4 in. Spanner

HARDWARE INCLUDED

NOTE: Hardware not shown to actual

size.

Part Description Quantity

AA 1/4 in. dome head bolt 32

BB 1/4 in. nut 44

CC 1/4 in. allen bolt 23

DD 1/4 in. washer 11

EE 5/16 in. washer 3

FF 5/16 in. bolt 3

GG 1/4 in. spring washer 8

HH Allen key 1

NOTE: It is recommended that the carton is cut open and

spread out on the oor and used as a protective surface

during assembly.

WARNING: While every precaution has been made in the

manufacture of this product, care must be taken during

assembly in case sharp edges are present.

NOTE: Refer to the assembly diagrams as necessary.

NOTE: Please lay out all nuts and bolts and check lengths

before assembly.

AA BB CC

EE FF GG