Instructions / Assembly
8
Assembly
1 Assembling the legs
□ Attach the base plate (C) to the base (A) using the two
pretted bolts.
□ Attach the upper and lower cylinder chamber supports
(B) together using six bolts (CC) and nuts (BB).
□ Fix the cylinder chamber supports (B) to the
corresponding section on the base (A) with the 6 pre-
tted bolts.
□ Finger tighten only at this stage.
2 Attaching the cylinder chamber walls
□ Using 11 of the bolts (AA) and nuts (BB), attach the lower
cylinder chamber wall (E) to the bottom of the cylinder
chamber supports (B) and attach the upper cylinder
chamber wall (D) by overlapping the lower cylinder
chamber wall (E) as shown.
E
B
D
C
A
B
BB
CC
AA
BB