Warranty

Assembly (continued)

9 Assembling the reector

□ Loosely screw the reector side panels (O) together using

twelve bolts (AA) and nuts (BB), overlapping as shown

below.

□ Attach the top panel (N) to the top of the assembled side

panels (O) using six bolts (AA) and nuts (BB) and then

fully tighten all bolts.

WARNING: While every precaution has been made in the

manufacture of this product, care must be taken during

assembly in case sharp edges are present.

10 Attaching the reector to the

lantern

□ Fit the reector to the lantern (K) using three bolts (FF)

and washers (EE).