Instructions / Assembly

6
Installation (continued)
3
Hanging the light fixture
□
Push all excess wires into the outlet box.
□
Raise the canopy (A) to the ceiling and secure in
place by screwing the lock nut (DD) onto the nipple (FF),
and then screw the nial (GG) to end of the nipple (FF).
House wire
black
(or red, or blue)
(HOT)
House wire
white
(NEUTRAL)
Fixture wire
smooth
(HOT)
Fixture wire
ribbed
(NEUTRAL)
Fixture wire
ground wire
(GROUND)
Ribbed line
House wire
green
(or bare wire,
or green & yellow)
(GROUND)
Install the xture bare copper ground wire (1) under the
ground screw (EE) on the cross bar (BB).
Connect the xture bare copper ground wire (1) to the green
(or bare, or green & yellow) supply ground wire (2) in the
outlet box using a wire nut (AA).
Connect the ribbed xture wire (3) to the white supply wire
(4) in the outlet box using a wire nut (AA).
Connect the smooth xture wire (5) to the black (or red, or
blue) supply wire (6) in the outlet box using a wire nut (AA).
2
Connecting the wires
□
□
□
□
6
4
3
2
EE
AA
5
BB
FF
A
DD
GG
1