Use and Care Manual

HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
5
Assembly
1
Assembling the light fixture
□ Carefully unpack the xture and lay out all parts on a clean
surface.
This xture can be assembled up or down.
Screw the chain loop (A) to the top of the column assembly (B).
Attach the hooks of the arms (C) to the loops of the column
assembly (B).
Attach the other hooks of the arms (C) to the loops of the
xture body (D).
□
□
□
2
Preparing the light fixture to hang
□
□
□
Attach the quick link (KK) to one end link of chain (JJ) and attach
the quick link (KK) to the chain loop (A).
Remove chain links from the chain (JJ) in order to
achieve the desired length for hanging the light xture.
Thread the xture and ground wires up through every link
in the chain (JJ).
To open the chain link: Use a pair of pliers and a screwdriver as
shown above to open a chain link. Wrap the jaws of the pliers with
cloth to protect the nish.
A
A
KK
JJ
B
C
D
Hook
Loop
Loop
Hook
1
2
3
NOTE: The quick link (KK) must be fully threaded closed.