Use and Care Manual

HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
HH
GG
E
Socket
II
3
Hanging the light fixture
Push all excess wires into the outlet box.
Raise the canopy (GG) to the ceiling and secure in
place by screwing the screw collar nut (II) onto the
screw collar loop (HH).
7
4
Installing the bulbs
Prior to installing the bulbs, inspect sockets for silica
packets. If packets are present, then remove and throw
away. Do not expose to children or pets.
Install ve 120V, 60Hz, 60-Watt medium-base type S21 (ST64)
bulbs (E) (included) into the sockets of the light xture.
Installation (continued)
Care and Cleaning
Troubleshooting
Clean the light xture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Problem Possible Cause Solution
The bulb will not light. The bulb is burned out. Replace the light bulb.
The power is off. Ensure that the power supply is turned on.
There is a faulty wire connection. Check the wiring.
The circuit breaker is off. Ensure that the circuit breaker is set in the
on position.
The fuse blows or a circuit breaker
trips when the light is turned on.
There is an exposed wire.
There are too many items on one circuit.
Discontinue use of the light xture.
Unplug other items on the circuit.
r
Contact a qualied electrician or
call the Customer Service Team at
1-855-HD-HAMPTON.