Instructions / Assembly

Assembly
4
□
□
□
□
□
Screw the lower pole (I) to top of the base (J).
Screw the middle pole (H) to top of the lower pole (I).
Screw the upper pole (G) to bottom of the socket assembly (F).
Pull the excess power cord through the base (J).
Screw the upper pole (G) to top of the middle pole (H).
□
□
□
Unscrew one screw (D) from the socket assembly (F) as shown.
Insert the other two screws (D) on top of the socket assembly (F)
into the two keyholes in glass dome holder of the shade (C) and
twist the shade (C) counterclockwise.
Secure the glass dome holder of the shade (C) to top of the socket
assembly (F) with the screw (D) removed above, then tighten the
other two screws (D).
1
Attaching the poles and base
2
Assembling the shade
C
D
Glass dome holder
Glass dome holder
D
F
C
D
D
F
F
G
H
I
J
NOTE: Remove the plastic cover before using this shade (C).