Instructions / Assembly

Assembly
4
□
□
□
Screw one 120V 60Hz 100-Watt Max. medium base (E26) type
A bulb (sold separately) into the socket (F).
Slide the rubber ring (C) over bottom edge of the glass dome (B).
Screw the glass dome (B) into the glass dome holder.
2
Installing the bulb and the glass dome
B
C
F
Bulb
(sold separately)
Glass dome
holder
D
D
D
G
E
E
E
G
Glass dome
holder
Glass dome holder
□
□
□
Unscrew one screw (E) from the lamp body (G) as shown.
Insert the other two screws (E) on top of the lamp body (G) into
the two keyholes in glass dome holder of the shade (D) and
twist the shade (D) counterclockwise.
Secure the glass dome holder of the shade (D) to top of the
lamp body (G) with the screw (E) removed above, then tighten
the other two screws (E).
1
Assembling the shade
NOTE: Remove the plastic cover before using this shade (D).
NOTE: If LED bulb is used, the LED bulb must be rated
for damp locations and enclosed luminaires.