Installation Guide

Assembly
1 Assembling the light fixture
□ Carefully unpack the fixture, lay out all parts
on clean surface.
□ The arms (F) have been turned to flat for
shipping. Carefully turn them so that they are
evenly spaced.
□ Screw the chain loop (A) to top of the light
fixture (B).
□ Secure the font (H) to bottom of the light
fixture (A) with the finial (G) and the nipple (I).
□ Place a glass shade (E) over each socket, then
secure with a spacer (D) and a socket ring (C).
□ Install a 60-watt max. type A bulb (not
included) into each socket on the light fixture.
5
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
2 Preparing the light fixture to hang
□ Use chain pliers or pliers with a screwdriver (see
below) to open one link on the end of the chain (JJ)
and attach the chain (JJ) to the chain loop (A) on the
top of the light fixture (B).
□ Remove or add chain links from the chain (JJ) in
order to achieve the desired length for hanging the
light fixture (B).
□ Thread the fixture and copper ground wires up
through every other link in the chain (JJ).