Instructions / Assembly

2
3
Adjusting the color temperature of the light
□ Choose your favorite correlated color temperature (CCT) from three options: 2700K warm white, 3000K warmest white, or 4000K bright white.
□ Rotate the knob (A) clockwise or counter clockwise to make your selection.
NOTICE: The factory setting for the correlated color
temperature (CCT) is 3000K warmest white.
□
□ Clean the fixture with a soft dry cloth.
□ Do not use any cleaners with chemicals, solvents or harsh abrasives.
Problem
Possible Cause
Solution
The fixture will not
light.
□ There is no power.
□ There is a disconnection or
break in the wire.
□ The transformer setting is
incorrect.
□ Check the outlet and ensure that a breaker or GFCI circuit has not been tripped.
□ Follow the wires from the fixture and ensure a continuous connected path back to the transformer.
□ Check the settings on the transformer.
The light flickers
(one fixture).
□ There is a loose wire
connector to the fixture.
□ Tighten the wire connector and ensure the metal contacts pierce the insulation on the low voltage
cable from the transformer.
The lights flicker
(all fixtures).
□ There is a loose connection at
the transformer.
□ Unplug the transformer from the outlet and visually inspect the positive and negative connecting
points. Each wire should be securely screwed in and not in contact with any other.
WHAT IS COVERED
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of five (5) years from date of purchase. This warranty
applies only to the original consumer and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation,
and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through
misuse, abuse, accident, modifications, alterations, neglect or mishandling.
WHAT IS NOT COVERED
This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied
with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, or faulty installation, or any
other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering,
as this is considered normal wear and tear.
The manufacturer does not warrant and specifically disclaims any warranty, whether express or implied, of fitness for a particular purpose, other than the warranty
contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not
limited to any labor / expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com.