Instructions / Assembly

7 HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Installing bulbs

□ Screw two 60-Watt maximum, incandescent medium-

base bulbs (sold separately) into the sockets (G).

You can use LED equivalent energy-saving bulbs

that do not exceed 8 Watts each (sold separately).

□ Clean the fixture with a soft, dry cloth.

□ Do not use any cleaners with chemicals, solvents or hash abrasives.

Before attempting to clean the fixture,

disconnect the power to the fixture by turning the breaker off

or removing the fuse from the fuse box.

Problem

Possible Cause

Solution

The bulb will not light.

The power is off.

Ensure the power supply is On.

The circuit breaker is off.

Ensure the circuit breaker is in the On position.

The fuse blows or circuit

breaker trips when the

light is turned on.

Crossed wires or power wire is

grounding out.

□ Check the wire connections.

□ Contact a qualified electrician or call the

Customer Service Team at

1-855-HD-HAMPTON.