Item #1008 506 401 Model # KCS1601LX-01 USE AND CARE GUIDE MADISON LED EXTERIOR WALL LANTERN Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this LED interior vanity. We strive to continually create quality products designed to enhance your home.
Table of Contents Tools Required ........................................... 3 Hardware Included..................................... 3 Package Contents ...................................... 4 Installation ............................................. 5 Care and Cleaning ................................... 7 Troubleshooting ...................................... 7 Table of Contents ..................................... 2 Safety Information....................................2 Warranty.....................
Pre-Installation PLANNING INSTALLATION Read all instructions before assembly. Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: Keep your receipt and these instructions for proof of purchase.
Pre-Installation (continued) PACKAGE CONTENTS Part Description Quantity A Fixture Body 1 CAUTION: The fixture (A) is one piece. Do not disassemble it.
Installation 1 Attaching the mounting plate to the outlet box 2 □ Place the mounting plate (AA) in front of the outlet box (sold separately). Make sure the two horizontal edges of the mounting plate (AA) are facing left/right. Ensure the wires from the outlet box are either inside the outlet box, or through the hole in the center of the mounting plate (AA).
Installation (continued) 3 □ □ □ Securing the fixture to the mounting plate 4 Place the fixture (A) against the mounting plate (AA). Use a Philips screwdriver to screw a set screw (BB) through the hole on the left of the fixture (A) and through the hole on the left of the mounting plate (AA). Use a Philips screwdriver to screw a set screw (BB) through the hole on the right of the fixture (A) and through the hole on the right of the mounting plate (AA). CAUTION: The fixture (A) is one piece.
Care and Cleaning CAUTION: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box. □ □ Clean the fixture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives. Troubleshooting Problem Possible Cause Solution The fixture will not light. The power is off. Ensure the power supply is On. The circuit breaker is off. Ensure the circuit breaker is in the On position.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Artículo #1008 506 401 Modelo # KCS1601LX-01 GUÍA DE USO Y MANTENIMIENTO MADISON LINTERNA DE PARED LED EXTERIOR Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay de Lunes a Viernes entre 8 a.m. y 7 p.m., El Sábado entre 9 a.m. y 6 p.m.(hora del Este de EE. UU.) 1-855-HD-HAMPTON HAMPTONBAY.COM GRACIAS POR TU COMPRA. Agradecemos la confianza que ha tenido en Hampton Bay a traves de de la compra de esta lampara interior LED.
Índice Herraminentas Necesarias....................... 11 Requiere de Hardware ............................. 11 Contenido del Paquete ............................. 12 Instalación .............................................13 Mantenimiento y Limpieza ......................15 Solución de Problemas ...........................15 Índice .................................................... 10 Información de Seguridad ....................... 10 Garantía ................................................
Pre-Instalación PLANIFICACIÓN DE LA INSTALACIÓN Lee todas las instrucciones antes de ensamblar. Antes de comenzar la instalación o de quitar la instalación anterior, desconecte la alimentacion apagando el interruptor del circuito o quitando el fusible en la caja de fusible. Para evitar dañar el artículo, ensámblalo sobre una superficie suave, no abrasiva, como por ejemplo una alfombra o cartón. NOTA: Conserva el recibo y estas Instrucciones como Comprobante de Compra.
Pre-Instalación (continuación) CONTENIDO DEL PAQUETE Pieza A Descripción Cantidad Instalación 1 ADVERTENCIA: El instalación (A) es una sola pieza. No la desarme.
Instalación 1 □ □ □ Acoplar la placa de montaje a la caja de salida 2 □ Coloque la placa de montaje (AA) frente a la caja de salida (se vende por separado). Asegúrese de que los dos bordes horizontales de la placa de montaje (AA) estén Izquierda o derecha . Asegúrese de que los cables de la caja de salida estén dentro de la caja de salida o a través del orificio en el centro de la placa de montaje (AA).
Instalación 3 □ □ □ Sujetar el instalación a la placa de montaje Coloque el instalación (A) contra la placa de montaje (AA). Utilice un destornillador Philips para atornillar un tornillo de fijación (BB) a través del orificio en la lado izquierdo del instalación (A) y a través del orificio en la lado izquierdo de la placa de montaje (AA).
Mantenimiento y Limpieza ADVERTENCIA: Antes de intentar limpiar la pieza, desconéctela o apague el interruptor o remueva el fusible de la caja de fusibles . □ □ Limpia la lámpara con un paño suave y seco. No uses limpiadores con quimicos, solvents, o productos abrasivos. Solución de Problemas Problema El accesorio no iluminará. El fusible se funde o el cortacircuito se activa cuando se enciende la luz. Causa Posible Solución La electricidad está apagada.
1001 606 561 Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay de Lunes a Viernes entre 8 a.m. y 7 p.m., El Sábado entre 9 a.m. y 6 p.m.(hora del Este de EE. UU.) 1-855-HD-HAMPTON HAMPTONBAY.COM Conserva este manual para referencias futuras.
Article #1008 506 401 Modèle # KCS1601LX-01 GUIDE D'UTILISATION ET D'ENTRETIEN MADISON LED MUR EXTERIEUR LANTERNE Questions, problèmes, pièces manquantes? Avant de retourner au magasin, veuillez communiquez avec le service à la clientèle Hampton Bay entre 8h00 et 19h00 (HNE) du lundi au vendredi, entre 9h00 et 18h00 (HNE) du samedi 1-855-HD-HAMPTON HAMPTONBAY.COM MERCI Nous vous remercions de la confiance que vous avez place en Hampton Bay en vanity d’intérieur à DEL.
Table des Matières Table des matières ..................................... 18 Consignes de sécurité ................................ 18 Garantie ...................................................... 18 Ce qui est couvert .................................... 18 Ce qui est couvert (et pas) ....................... 18 Pré-Installation .......................................... 19 Planification de l'installation .................... 19 Outils Requis ............................................
Pré-Installation PLANIFICATION DE L'INSTALLATION Lisez toutes les instructions avant de procéder à l’assemblage. Avant de commencer à installer ce luminaire ou d’enlever l’ancien luminaire, déconnectez le courant en eteignant le disjoncteur ou en enlevant le fusible correspondent du coffret à fusibles. Pour éviter d’endommager ce produit, assemblez-le sur une surface molle et non abrasive telle qu’un tapis ou un carton. REMARQUE: Conservez le reçu, ainsi que ces instructions, à titre de preuve d’achat.
Pré-Installation (suite) CONTENU DE L'EMBALLAGE Pièce A Description Quantité Corps du Luminaire ATTENTION: Le corps du luminaire (A) est d’une pièce. Ne pas le désassembler.
Installation 1 □ □ □ Attacher plaque de montage à le boîte de sortie Placez la plaque de montage (AA) devant la boîte de sortie (vendue séparément). Assurez-vous que les deux bords horizontaux de la plaque de montage (AA) sont orientés vers le gauche / droite. Assurez-vous que les fils de la boîte de sortie sont soit à l'intérieur de la boîte de sortie, soit à travers le trou au centre de la plaque de montage (AA).
Installation (suite) 3 □ □ □ Fixation de la luminaire à la plaque de montage 4 Placez le luminaire (A) contre la plaque de montage (AA). Utilisez un tournevis cruciforme pour visser une vis de réglage (BB) à travers le trou sur le côté gauche de l' luminaire (A) et à travers le trou sur le dessus de la plaque de montage (AA). Utilisez un tournevis cruciforme pour visser une vis de réglage (BB) à travers le trou au côté droit de l' luminaire (A) et à travers le trou au bas de la plaque de montage (AA).
Entretien et Nettoyage ATTENTION: Débrancher l’alimentation électrique avant de nettoyer le luminaire en enlevant les fusibles concernés ou en désactivant le disjoncteur. □ □ Nettoyez la lampe avec un linge doux, sec. N'utilisez jamais de nettoyant contenant des produits chimiques, des solvants ou des abrasifs. Dépannage Problème Cause Possible Le luminaire ne s'allume pas. Le courant est coupé. Le fusible grille ou le disjoncteur se déclenche lorsque la lumière est allumée.
Questions, problèmes, pièces manquantes? Avant de retourner au magasin, veuillez communiquez avec le service à la clientèle Hampton Bay entre 8h00 et 19h00 (HNE) du lundi au vendredi, entre 9h00 et 18h00 (HNE) du samedi 1-855-HD-HAMPTON HAMPTONBAY.COM Conservez ce guide pour un usage ultérieur.