Installation Guide

5 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Installation

Installing the gem bar

□ Remove the gem bar (A) from the light xture

□ Attach the gem bar (A) to the outlet box by

securing it with the gem bar screws (BB).

Connecting the wires

CAUTION: Ensure the power is off at the fuse or circuit

breaker box. Check the power supply wires for damage

or scrapes. If the power supply wires are within 3 in. of

the ballast power supply, use a wire that is suitable for

temperatures that are at least 194°F (90°C).

IMPORTANT: Most dwellings built before 1985 have

supply wire rated to 140°F (60°C). Consult a qualied

electrician before installing.

□ Connect the bare copper wire (DD) from the

xture to the power source green wire (DD).

□ Connect the black xture wire (EE) to the black

power source wire (EE).

□ Connect the white xture wire (FF) to the white

power source wire (FF).

□ Secure all wiring connections together with

wire connectors (CC).

□ Tuck all wiring connections back into the outlet

box.

Installing the light fixture

□ Place the canopy (B) over the gem bar (A) and

align the two mounting holes on both sides of

the canopy (B).

□ Attach the xture (C) to the outlet box by

securing the canopy (B) with two canopy

screws (AA).

□ Restore power to the fuse or circuit breaker

box.