Installation Guide

6
Care and Cleaning
Use a dry or slightly dampened clean cloth to wipe the glass and surface of the xture. Do not use any cleaners with
chemicals, solvents, or harsh abrasives. If necessary, use a mild soap with water to clean off any dirt or stains.
Troubleshooting
Problem Probable Cause Solution
The lights do not turn on. □ The wall switch and/or circuit breaker
is off.
□ The is an incorrect or loose wire con-
nection.
□ Turn on the wall switch or
circuit breaker.
□ Access the outlet box and x
the wire connections.
The fuse blows or the circuit
breaker trips when the
lights are turned on.
□ There are crossed wires or the power
wire is not grounded.
□ Access the outlet box and x
the wire connections.