Item #1006 470 303 Model # KFN8901AS-01/BN Item #1006 367 834 Model # KFN8901AS-01/BR USE AND CARE GUIDE BELVEDERE PARK INTERIOR 1-LIGHT MINI-PENDANT Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this pendant.
Table of Contents Tools Required ........................................... 3 Hardware Included ..................................... 3 Package Contents ...................................... 4 Installation ............................................. 5 Care and Cleaning ................................ 7 Troubleshooting .................................... 7 Table of Contents ..................................2 Safety Information .................................2 Warranty ..............................
Pre-Installation PLANNING INSTALLATION Read all instructions before assembly. Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse from the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: Keep your receipt and these instructions for proof of purchase.
Pre-Installation (continued) PACKAGE CONTENTS Part Description Quantity A Loop 1 B Rod A (304 mm long) 1 C Bushing A 1 D Rod B (304 mm long) 1 E Bushing B 1 F Top Cover 1 G Set Screw (15 mm long) 3 H Socket 1 I Globe 1 4
Installation 1 Securing the rods □ Screw rod B (D) onto bushing B (E). □ Screw rod A (B) onto bushing A (C). 2 □ □ □ □ □ 3 Attaching the mounting strap to the outlet box Screw the nipple (GG) about 1/2 in. into the screw collar loop (II). Screw the hex nut (FF) onto the nipple (GG). Screw the other end of the nipple (GG) about 3/8 in. into the mounting strap (CC). Tighten the hex nut (FF) against the mounting strap (CC) to secure the nipple (GG).
Installation (continued) the electrical 4 Making connections □ □ □ □ □ □ 6 □ 5 Weave the fixture wires up through the chain (JJ), the ring (HH), the canopy (AA), the screw collar loop (II), and the nipple (GG). Wrap the ground wire from the fixture around the ground screw (DD) on the mounting strap (CC). Use a wire connector (BB) to connect the end of the ground wire from the fixture to the ground wire from the outlet box.
Installation (continued) 7 □ □ Attaching the globe Place the globe (I) into the top cover (F). Screw the set screws (G) into the holes on the top cover (F) to secure the globe (I). Care and Cleaning □ □ Clean the fixture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents or hash abrasives. WARNING: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Artículo # 1006 470 303 Modelo # KFN8901AS-01/BN Artículo # 1006 367 834 Modelo # KFN8901AS-01/BR GUÍA DE USO Y MANTENIMIENTO BELVEDERE PARK MINI COLGANTE INTERIOR 1 LUZ Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay de Lunes a Viernes entre 8 a.m. y 7 p.m., El Sábado entre 9 a.m. y 6 p.m., (hora del Este de EE. UU.) 1-855-HD-HAMPTON HAMPTONBAY.
Índice Herraminentas Necesarias....................... 11 Hardware Includio .................................... 11 Contenido del Paquete ............................. 12 Instalación ........................................... 13 Mantenimiento y Limpieza ................. 15 Solución de Problemas....................... 15 Índice ....................................................10 Información de Seguridad ..................10 Garantía ................................................
Pre-Instalatión PLANIFICACIÓN DE LA INSTALACIÓN Lee todas las instrucciones antes de ensamblar. Antes de comenzar la instalación o de quitar la instalación anterior, desconecte la alimentacion apagando el interruptor del circuito o quitando el fusible en la caja de fusible. Para evitar dañar el artículo, ensámblalo sobre una superficie suave, no abrasiva, como por ejemplo una alfombra o cartón. NOTA: Conserva el recibo y estas Instrucciones como Comprobante de Compra.
Pre-Instalación (continuación) CONTENIDO DEL PAQUETE Pieza Descripción Cantidad A Lazo 1 B Vara A (304 mm de largo) 1 C Buje A 1 D Vara B (304 mm de largo) 1 E Buje B 1 F Cubierta Superior 1 G Tornillo de Fijación (15 mm de largo) 3 H Portalámpara 1 I Globo 1 12
Instalación 1 □ □ 2 Asegurar las varas □ Enrosque la vara B (D) en el buje B (E). Enrosque la vara A (B) en el buje A (C). □ □ □ □ 3 Colocando la correa de montaje en la caja de salida Enrosque la boquilla de montaje (GG) aproximadamente 1/2 pulg. En el bucle del collarín de tornillo (II). Enrosque la tuerca hexagonal (FF) en la boquilla de montaje(GG). Enrosque el otro extremo de la boquilla de montaje(GG) aproximadamente 3/8 pulg. En la correa de montaje (CC).
Instalación (continuación) 4 Hacer las conexiones eléctricos 5 □ Teje los cables del accesorio a través de la cadena (JJ), el anillo (HH), el dosel (AA), el bucle del collar roscado (II) y la boquilla de montaje (GG). Envuelva el cable de tierra del dispositivo alrededor del tornillo de toma de tierra (DD) en la correa de montaje (CC). Utilice un conector de cable (BB) para conectar el extremo del cable de tierra del accesorio al cable de tierra de la caja de salida.
Instalación (continuación) 7 □ □ Asegurando los globo Coloque el globo (I) en la cubierta superior (F). Atornille los tornillos de fijación (G) en los orificios de la cubierta superior (F) para asegurar el globo (I). Mantenimiento y Limpieza □ □ Limpia la lámpara con un paño suave y seco. No uses limpiadores con químicos, solvents, o productos abrasivos. PRECAUCIÓN: Antes de intentar limpiar la pieza,desconéctela o apague el interruptor o remueva el fusible de la caja de fusibles.
Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay de lunes a Viernes entre 8 a.m. y 7 p.m.,,El sábado entre 9 a.m. y 6 p.m., (hora del Este de EE. UU.) 1-855-HD-HAMPTON HAMPTONBAY.COM Conserva este manual para referencias futuras.
Article # 1006 470 303 Modèle # KFN8901AS-01/BN Article # 1006 367 834 Modèle # KFN8901AS-01/BR GUIDE D'UTILISATION ET D'ENTRETIEN BELVEDERE PARK MINI-PENDENTIF INTÉRIEUR À 1 LUMIÈRE Questions, problèmes, pièces manquantes? Avant de retourner au magasin, veuillez communiquez avec le service à la clientele Hampton Bay entre 8h00 et 19h00 (HNE) du lundi au vendredi, entre 9h00 et 18h00 (HNE) du samedi 1-855-HD-HAMPTON HAMPTONBAY.
Table des Matières Outils Requis ............................................ 19 Materiel Inclus ......................................... 19 Contenu de l'Emballage ........................... 20 Installation ........................................... 21 Entretien et Nettoyage........................ 23 Dépannage ........................................... 23 Table des Matières ..............................18 Consignes de Sécurité ........................18 Garantie ......................................
Pré-Installation PLANIFICATION DE L'INSTALLATION Lisez toutes les instructions avant de procéder à l’assemblage. Avant de commencer à installer ce luminaire ou d’enlever l’ancien luminaire, déconnectez le courant en eteignant le disjoncteur ou en enlevant le fusible correspondent du coffret à fusibles. Pour éviter d’endommager ce produit, assemblez-le sur une surface molle et non abrasive telle qu’un tapis ou un carton. REMARQUE: Conservez le reçu, ainsi que ces instructions, à titre de preuve d’achat.
Pré-Installation (suite) CONTENU DE L'EMBALLAGE Pièce Description Quantité A Boucle 1 B Tige A (304 mm de long) 1 C Bague A 1 D Tige B (304 mm de long) 1 E Bague B 1 F Couvercle Supérieur 1 G Vis de Réglage (15 mm de long) 3 H Douille 1 I Abat-jour 1 20
Installation 1 □ □ Sécuriser les tiges Visser la tige B (D) sur la bague B (E). Visser la tige A (B) sur la bague A (C). 2 □ □ □ □ □ 3 Fixation de la sangle de montage sur la boîte de courant Vissez le raccord fileté de montage (GG) à environ 1/2 po dans la boucle du collier à vis (II). Visser l'écrou hexagonal (FF) sur le raccord fileté de montage (GG). Vissez l'autre extrémité du raccord fileté de montage (GG) à environ 3/8 po dans la sangle de montage (CC).
Installation (suite) 4 □ □ □ □ □ □ 6 □ Faire les connexions électriques 5 Faites passer les fils de l'appareil à travers la chaîne (JJ), l'bague (HH), la plafonnier (AA), la boucle du collier à vis (II) et le raccord fileté de montage (GG). Enroulez le fil de terre du luminaire autour de la vis de terre (DD) sur la sangle de montage (CC). Utilisez un serre- fil (BB) pour connecter l'extrémité du fil de terre de l'appareil au fil de terre de la boîte de sortie.
Installation (suite) 7 □ □ Fixer les abat-jour Placez le abat-jour (I) dans le couvercle supérieur (F). Vissez les vis de réglage (G) dans les trous du couvercle supérieur (F) pour fixer le abat-jour (I). Entretien et Nettoyage □ □ Nettoyez la lampe avec un linge doux, sec. N'utilisez jamais de nettoyant contenant des produits chimiques, des solvants ou des abrasifs.
Questions, problèmes, pièces manquantes? Avant de retourner au magasin, veuillez communiquez avec le service à la clientèle Hampton Bay entre 8h00 et 19h00 (HNE) du lundi au vendredi, entre 9h00 et 18h00 (HNE) du samedi 1-855-HD-HAMPTON HAMPTONBAY.COM Conservez ce guide pour un usage ultérieur.