Installation Guide

ManualsBrandsHampton Bay ManualsAssembled Kitchen CabinetsHampton Assembled 30x30x12 in. Wall Kitchen Cabinet in Unfinished Beech

BASE CABINETS:

Depending on the flooring, there will be different ways to level cabinets:

FLOORS:

• If cabinets will be installed prior to finished floor, cut plywood strips to the thickness of the floor and underlayment

• If you encounter an uneven surface, position shim under strips to a level position

• If cabinets will be installed after finished floor, shim until the base cabinets are level.

UNEVEN WALLS:

• If you encounter minor bowing on the wall, position shim behind the base cabinet until level and plumb

• If bowing is extreme, multiple shims may be required.

Please note:

• All Hampton Bay kitchen wall and base cabinets include full installation manuals.

• This is a reference guide for troubleshooting. Methods described here are recommendations only, and are based on commonly used

installations. It is the installer’s responsibility to ensure proper installation of the product. AWC does not warrant the installation of this product.

Locate the highpoint on the oors.

Measure 34 1/2" from the level line and

mark another level line.

This will be the top of the base cabinets.