Use and Care Manual

Assembly Instructions

Item# L-FT521PST-3A

Parts List:

Tools Required for Assembly:

Wrench (include) and Philips Screwdriver (Not included)

Assembly instructions:

No.

Description

Qty

Fire screen

Cooking grate

Grate

Fire bowl

Ash catcher

Slate top

Leg

Leg connector

Middle connect piece

Poker

PVC cover

M6x15 bolt

M5x10 bolt

M6 flanged nut

M5 flanged nut

M6 flat washer

M6/M5 wrench

Step 1: Put Slate top (F) upside down on a soft,

non-abrasive surface, connect Leg (G) to Slate top (F)

with flanged nut CC). Please do not tighten the bolt

here!

Step 2: Connect Leg connector (H) and Middle

connect piece (I) with bolt (AA) and nut (CC). Please

do not tighten the bolt here!

PAGE 1
Assembly Instructions Item# L-FT521PST-3A Parts List: No.
PAGE 2
Step 3: Connect assembled Leg connector (H) and Leg (G) with bolt (AA) and washer (EE). Tighen all bols here. Step 4: Connect ash catcher (E) and fire bowl (D), tighten with bolt (BB) and flanged nut (DD). Step 5: Turn over the whole assembled piece. Place Fire bowl (D), Grate (C), Cooking grate (B) and Fire screen (A) in order. Use Poker (J) and PVC cover (K) as necessary. Now, your firepit is perfect ready for use. Warnings and cautions:  This fire bowl is intended for outdoor use only.
PAGE 3
Care & Maintenance: 1. Before using, clean the product completely with a soft dry towel. 2. To extend the life of your fire pit, clean the bowl after each use and cover the unit to protect it from the elements, cover is not included. Due to natural properties of steel material, if rust develops, please clean rust area by sanding slightly, then wipe thoroughly and apply touch-up paint if possible.