Instructions / Assembly

Pre-Assembly (continued)

PACKAGE CONTENTS

A1 Pole 1 2

2Pole 2 2

B Long Screen 2

C Short Screen 2

D Corner Pole 4

E Big Center Connector 1

F Small Center Connector 1

G Small Top Pole 4

HTabletop 2

I Support bar 4

J Hook 1

K Small Canopy 1

L Big Canopy 1

PAGE 1
Pre-Assembly (continued) . PACKAGE CONTENTS . A1 . A2 . . I J . A3 K B . L . C . . . .
PAGE 2
Installation 1 □ Attaching the screens to the poles 2 □ Attach the short screen (C) and long screen (B) to pole 1 (A1)，pole 2（A2）and pole 3 (A3) using M6X20 bolts (AA) and M6 washers (BB). Put the hook (J) into the big center connector (E). Insert the corner top pole (D) into the big center connector (E). NOTE: To avoid destroying the finish, please handle it with care. NOTE: To avoid destroying the finish, please handle it with care.
PAGE 3
Installation Installation (continued) 5 □ Attaching the canopy 6 □ Put the big canopy (L) onto the big top. Do not fold. Attach the small top pole (G) to corner top pole (D) using a M6X40 bolt (CC), M6 washer (BB) and M6 nut (DD). Attaching the support bar to the table top Attach the support bar (I) to the tabletop (H) using a M6X20 bolt (EE) and M6 washer (BB). NOTE: To avoid destroying the finish, please handle it with Care. NOTE: To avoid destroying the finish, please handle it with care.