Installation Guide

ManualsBrandsHampton Bay ManualsLandscape LightingLamar Park 10-Watt Equivalent Low Voltage Black Integrated LED Outdoor Path Lights with Easy Clip Connectors (6-Pack)

Item #1006 684 101

Model #L08207

Use and Care Guide

HB 6PK LV BLACK PATH LIGHT

Part Description Quantity

Lamp cover

Lens

Body

Post

Spike

Connector

12W transformer

Cable

Control box

PACKAGE CONTENTS

Assembly and Installation

Attaching and installing the pathlight

WARNING:

to insert the spike (D) into the ground.

CAUTION: Safe for outdoor operation.

WARNING: To reduce the risk of FIRE OR INJURY TO PERSONS:

WARNING

or bulb protector.

Install the plastic lenses (B) in the lante

Carefully remove the ﬁxture from its protective packaging.

rn body (C), attach the

post (D) to the body (C) and insert the spike (E) into the post (D).

Attach lamp cover (A) to the plastic lense (B) and turn them

clock wise.

WARNING: Install in accordance with all local codes and ordinances.

FOR LANDSCAPE LIGHTING SYSTEMS ONLY. OUTDOOR USE ONLY. THE DEVICE IS

ACCEPTED AS A COMPONENT OF A LANDSCAPE LIGHTING SYSTEM WHERE THE

SUITABILITY OF THE COMBINATION SHALL BE DETERMINED BY CSA OR LOCAL

INSPECTION AUTHORITIES HAVING JURISDICTIO

PATHLIGHT ETL LISTED UNDER MODEL # L08207.

Please read and save these instructions.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

IMPORTANT SAFETY INSTRUCTIONS.

Lighted lamp is HOT!

Connecting the wires

WARNING: The wire connector (F) contacts have sharp edges for pie rcing the

main low-voltage cable. To avoid injury, do not touch the metal contacts.

CAUTION: The wire from the low-voltage power unit shall be 12-18 AWG type

underground low energy circuit cable or SPT2W.

IMPORTANT:

•

building structu

Protect the wiring by routing it in close proximity to the light ﬁtting or next to a

re such as a house or deck.

• The landscape wire and connector can also be hidden under stone or buried

under grass at a maximum depth of 6 in. (15.24 cm).

•

WARNING: Risk of Electric Shock. Install all luminaires 10 ft. (3.05 m) or more

from a pool, spa or fountain.

WARNING: To reduce the risk of FIRE OR INJURY TO PERSONS:

WARNING: There are no serviceable parts inside the power supply unit. DO NOT

DISASSEMBLE.

WARNING: Do not submerge the transformer.

WARNING: Do not connect two or more transformers in parallel.

WARNING:

For use with 12-volt-low-voltage outdoor landscape lighting system only.

Not for use with submersible light or pool/spa equipment.

WARNING: Do not use with a dimmer.

CAUTION: Plug the power supply unit directly into a GFCI outlet that is marked “wet

location”. The maximum output of this transformer is 24 watts. Do not overload

the

to the transformer is equal to or less than 24 watts. This garden light system must be

transformer. Be sure that the total cumulative wattage of all 12-volt ﬁxtures connected

installed in accordance with all local codes and ordinances. If you are experiencing

WARNING: Do not use an extension cord.

H I

- 1 -

Summary of content (3 pages)

PAGE 1
Item #1006 684 101 Model #L08207 Use and Care Guide Please read and save these instructions. HB 6PK LV BLACK PATH LIGHT PACKAGE CONTENTS Part A B A B C G C D D F E G F E H H I I Description Quantity Lamp cover Lens 6 Body Post Spike Connector 12W transformer Cable Control box 6 6 6 6 6 1 1 1 Assembly and Installation 1 INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS IMPORTANT SAFETY INSTRUCTIONS.
PAGE 2
Assembly and Installation (Continued) Align the low-voltage wire and fit it into the connector (F) bottom half as shown below. Press the top half of the connector into the bottom half until it clicks into place and is secure. This will pierce the low voltage wire and connect the light to the transformer. Test the connection by plugging in the transformer to see if the light turns on. If it does, unplug the transformer and continue the installation.
PAGE 3
Care and Cleaning Do not use any cleaners with chemicals, solvents or harsh abrasives. Troubleshooting Problem Possible cause Solution • There is no power. • There is a disconnection or break in the wire. • There is a light source near the transformer. • connected to the transformer. light. Only some lights work. • Check that the power is on. • Check if there is a loose connection at the transformer screw terminal. • Make sure the photocell is not near a lighting source.